Master Cylinder PLEASE HELP!!! - Ranger-Forums - The Ultimate Ford Ranger Resource


General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 02-14-2014
Member
Thread Starter
 
Join Date: Feb 2014
Location: pratt ks
Posts: 3
Master Cylinder PLEASE HELP!!!

i cannot figure out how to get the pushrod that hooks to the clutch pedal to go down into the master cylinder. is there a special trick to get it in? it wont go. its on a 93 2.3l 4x4 ranger thanx to all.
Reply With Quote
  #2  
Old 02-14-2014
Blossomforth's Avatar
Member
 
Join Date: Feb 2014
Location: CT
Posts: 39
When i replaced mine, i disconnected the fork from the clutch pedal, then turned the master so it would pop out of the hole in the firewall. Once it's loose, you tilt it up and pull it away from the firewall and the rod will go with it. Unfortunately, the rod in the master is a one way deal. Once it clicks into the master, then its very difficult to remove.
Reply With Quote
  #3  
Old 02-15-2014
Member
Thread Starter
 
Join Date: Feb 2014
Location: pratt ks
Posts: 3
OK. I just can't get the new rod into the new master cylinder. I think I got a defective one. Cause I have tried everything and that sob will not go in. I'm taking it back tomorrow for a new one. Thanx for the reply. Greatly appreciated!
Reply With Quote
  #4  
Old 02-15-2014
pearlkid9988's Avatar
Member
 
Join Date: Dec 2008
Location: Newnan Georgia
Posts: 828
What brand i got a now name off rock auto and it was slotted only one way in. Also check the little snap ring in the top if its bent at all the rod won't go in its a tight fit.
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Conector on Brake master cylinder 00xlt4x4 General Technical & Electrical 4 03-04-2011 05:29 AM
I'm at a loss and desperately need help... Clutch Master Cylinder lostguitarist Drivetrain Tech 8 12-26-2009 12:24 AM
Clutch Master Cylinder From_Cars_To_Trucks General Technical & Electrical 13 12-22-2009 06:50 PM
Clutch Master Cylinder Replacement How To? Hillyard General Technical & Electrical 7 08-16-2009 02:45 PM
Clutch Master Cylinder fostergj General Technical & Electrical 3 06-03-2009 09:46 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 12:54 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.