i have the older kit on my 05 so i remember putting rotors from a 01 on since they were smaller but i dont remember if the pads were any different, i need new ones and its showing different part numbers for a 01 and a 05, if i just get them for the 05 they should work? i dont think it had anything to do with the pads, just the rotors but i dont feel like having to make two trips.

 

Get the pads for the '05.

 

k thanks adam, btw do you have a good pic of your skid plate? im going to make a similar one.

 

Here's the best two I have at the moment.

 

i want to make one like your bottom piece but fan out and up to the stock mounting spots.

 

what would cause pads on one side to be shot and the other half way? air in the system? i replaced them with ceramic pads but it feels like there could be more pedal to it.

 

Sounds like a caliper problem... is everything moving properly?

 

yup everything works like it should just pads show differences in wear, i was thinkin maybe air on that side so its not pressing as hard as the passenger side, i bled the driver side and when i took the nipple loose fluid started coming out on its own.