Seats??????????????
 

Yes, as far as I know 1993 to 2011 are direct swap

Around 2000 Ford started welding the seat part to the frame part, instead of bolting them on, so you will need to pull out the whole frame
You can cut the welds and use bolts if you even need to mix and match seats and frames

Thank you very much!
I found seats for a 2011 they are different then mine, the drivers sear has a armrest built in! I dont know if that is called 60/40 if it is that is the swap I want to make?

Yes, that's called a 60/40 bench seat

2010 and 2011 Rangers may have side airbags built into the drivers seat, maybe passenger side as well, just a heads up to be careful on what wires to hook up

Bought 97 seats last week for a 2000. They did not quite line up. Front right hole was too short. In addition they had a trailing bar behind the seat the Torx bolted to the floor.

So you are saying that the 2011 ?6/40 seats will bolt in to my 2002?

Yes most likely they will direct bolt.

Wiring issues, the seats that I got r out of an explorer, do not know the year. The problem is the Exolorer seats have two white wires the 02 has four wires ,red blue, green, black. which wires do I use to hook up?
I do not have a clue, no air bags in seats!

04 Explorer Sport Track

2010 Ford Ranger Seats
 

Good afternoon everyone, it's been awhile since I've been here, but was hoping that someone could help me Please! I have a 2010 Ford Ranger 2.3 Base model. 60/40 seats. Does anyone know what year Ford Explorer / Sport seats will match up?
Thanks

NONE, your 2010 Ranger has side airbags in the seats.

Aw man! okay, well thank you so much for your help.