General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

side mirror replacement?

Thread Tools
 
Search this Thread
 
Old Jul 4, 2008
  #1  
kyle12201's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 1,543
Likes: 0
From: East Waterboro, ME
side mirror replacement?

I want to replace my left side mirror as it is different then the one on my right side and is the ugly flag style. My question is how do you get the side mirror off? do you pop it off?i took the 3 screws off the door panal but it doesnt seem to want to pop off? how do you do it, thanks its also NOT electric
 

Last edited by kyle12201; Jul 4, 2008 at 11:00 AM.
Reply
Old Jul 4, 2008
  #2  
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 11
From: usa
door panel off. if you have manual windows there is two screws behind the the door handle, then one up top then one on the bottom. then pop the cover off the handle crank it swivels out of the way. then there is a torx bit screw behind that. then pull UP on the panel not up. right behind where the mirror is there is a stuck on film pull it off and there is what 10mm nuts that hold it on 3
 
Reply
Old Jul 4, 2008
  #3  
kyle12201's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 1,543
Likes: 0
From: East Waterboro, ME
i got the panal off only thing i couldnt get off was the window roller thing you mentioned ill give it a try when i order my mirror thanks
 
Reply
Old Jul 4, 2008
  #4  
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 11
From: usa
how are you getting the panel off with out getting the manual window crank off unless you dont have manual windows
 
Reply
Old Jul 4, 2008
  #5  
kyle12201's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 1,543
Likes: 0
From: East Waterboro, ME
the panal is off, but not completely like i can see enough behind it.. you know i just dont know how to get the crank off
 
Reply
Old Jul 4, 2008
  #6  
Rangerguy's Avatar
Member
Joined: Feb 2008
Posts: 1,121
Likes: 2
From: California
The plastic cover on the window crank snaps off to reveal a screw on the crank. Thats the way my 2001 is made. Yours should be the same.
 
Reply
Old Jul 4, 2008
  #7  
seth556's Avatar
Member
Joined: Aug 2007
Posts: 381
Likes: 0
From: Orlando FL
Remember that the screw in the crank is a torx screw. I'm not sure of the size though. It's around 2 or 3mm.
 
Reply
Old Jul 4, 2008
  #8  
kyle12201's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 1,543
Likes: 0
From: East Waterboro, ME
what does torx mean? never heard of it.. is it the "star" type bolt?
 
Reply
Old Jul 4, 2008
  #9  
Spirochets's Avatar
Member
Joined: Jun 2008
Posts: 291
Likes: 0
From: Lafayette, La
yep
 
Reply
Old Jul 4, 2008
  #10  
kyle12201's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 1,543
Likes: 0
From: East Waterboro, ME
alright sweet how do you pop off the cover to the door crank any special ways? tried a screw driver but that didnt work? thanks
 

Last edited by kyle12201; Jul 4, 2008 at 12:44 PM.
Reply
Old Jul 4, 2008
  #11  
seth556's Avatar
Member
Joined: Aug 2007
Posts: 381
Likes: 0
From: Orlando FL
Hmm. Mine just pulled off, a flat head screwdriver and some prying would probably work. But who knows. Well I'm sure someone knows.
 
Reply
Old Jul 4, 2008
  #12  
DarkBlue03XLT's Avatar
Member
Joined: Nov 2007
Posts: 158
Likes: 0
From: Overland Park, KS
just use a flathead screw driver and pry out, mine both popped off doing that
 
Reply
Old Jul 4, 2008
  #13  
04blackedge's Avatar
RF Veteran
iTrader: (13)
Joined: Jan 2007
Posts: 23,426
Likes: 8
From: Durham, NC
Flathead screwdriver and pry. The screw is a Torx 10
 
Reply
Old Jul 4, 2008
  #14  
seth556's Avatar
Member
Joined: Aug 2007
Posts: 381
Likes: 0
From: Orlando FL
I just found out when I was replacing my speakers yesterday that there's a screw on the door panel next to the air vent. It's broken on the left door so I found out when I got on the right side and kept struggling to get the panel off and then realized there had to be something holding it down on that side.
 
Reply
Old Jul 4, 2008
  #15  
kyle12201's Avatar
Thread Starter
|
Member
Joined: Apr 2008
Posts: 1,543
Likes: 0
From: East Waterboro, ME
really? alright guys ill go give it a shot, need to get a mirror off ebay first.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Masteratarms93
OLD - Interior, Exterior, Electrical, & Misc.
2
Oct 23, 2010 09:39 AM
briz
Exterior Semi-Tech
2
Apr 30, 2010 09:17 AM
Jp7
OLD - Interior, Exterior, Electrical, & Misc.
0
Oct 29, 2009 05:21 PM
malydeen
OLD - Interior, Exterior, Electrical, & Misc.
1
Apr 21, 2009 02:27 PM
drummerboy13
Exterior Semi-Tech
1
Nov 28, 2006 07:24 PM




All times are GMT -6. The time now is 11:54 PM.