superlift brake question help asap
i have the older kit on my 05 so i remember putting rotors from a 01 on since they were smaller but i dont remember if the pads were any different, i need new ones and its showing different part numbers for a 01 and a 05, if i just get them for the 05 they should work? i dont think it had anything to do with the pads, just the rotors but i dont feel like having to make two trips.
|
Get the pads for the '05.
|
k thanks adam, btw do you have a good pic of your skid plate? im going to make a similar one.
|
2 Attachment(s)
Here's the best two I have at the moment.
https://www.ranger-forums.com/attach...ine=1316747646 https://www.ranger-forums.com/attach...ine=1316747646 |
i want to make one like your bottom piece but fan out and up to the stock mounting spots.
|
what would cause pads on one side to be shot and the other half way? air in the system? i replaced them with ceramic pads but it feels like there could be more pedal to it.
|
Sounds like a caliper problem... is everything moving properly?
|
yup everything works like it should just pads show differences in wear, i was thinkin maybe air on that side so its not pressing as hard as the passenger side, i bled the driver side and when i took the nipple loose fluid started coming out on its own.
|
All times are GMT -6. The time now is 04:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands