General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Rivited Brake Shoes?

Thread Tools
 
Search this Thread
 
  #1  
Old 11-29-2010
flumixt's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: Redding, Ca
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
Rivited Brake Shoes?

I'll be having the brakes relined tomorrow. This will be the first brake job I've not done myself since 1953.

On the rear drum brakes the rear shoes are rivited but the front shoes are bonded. Why the difference?

I've requested NO rivited shoes - any reason I should withdraw that request?
 
  #2  
Old 11-29-2010
djfllmn's Avatar
Ford parts guy
Join Date: Mar 2009
Location: PA
Posts: 6,013
Likes: 0
Received 37 Likes on 30 Posts
you might not have a choice between rivited or bonded for the shoes...IIRC most shoes are rivited
 
  #3  
Old 11-29-2010
Toreador4x4's Avatar
Member
iTrader: (6)
Join Date: Apr 2007
Location: Livonia, MI
Posts: 3,958
Likes: 0
Received 3 Likes on 3 Posts
it is hit or miss on some vehicles whether you get riveted or bonded, most ranger pads are bonded, and fox mustang front pads are riveted. i think 99% of ranger shoes are riveted
 
  #4  
Old 11-29-2010
djfllmn's Avatar
Ford parts guy
Join Date: Mar 2009
Location: PA
Posts: 6,013
Likes: 0
Received 37 Likes on 30 Posts
^x2 the rear pads on my dads VW are rivited and theyre disc...im not sure about the front though
 
  #5  
Old 11-29-2010
IN2 FX4's Avatar
Member
Join Date: Feb 2005
Location: Costa Mesa, CA
Posts: 1,203
Received 89 Likes on 73 Posts
It is my understanding that bonded brake shoes transfer heat better and seems to be preferred over riveted. I am pretty sure my rear Raybestos Super Stop shoes are bonded.

I have never seen riveted brake pads.
 
  #6  
Old 11-29-2010
01_ranger_4x4's Avatar
Member
iTrader: (4)
Join Date: Mar 2009
Location: Muskegon, Michigan
Posts: 3,585
Likes: 0
Received 5 Likes on 2 Posts
i wouldn't worry about having riveted shoes for the rear but i wouldnt use riveted pads in the front, if they even still make them. i havent seen riveted pads since i changed pads on my 86 about 12 years ago. riveted shoes are fairly common though.
 
  #7  
Old 11-29-2010
flumixt's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: Redding, Ca
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
I've always been dead set against rivets because they can tear up the drums if you get careless and don't inspect soon enough.

It's being done at the Stealer but their price was more than competitive (beat the competition) and the rep said I could have bonded linings but they'd have to go out of house to get em. Maybe I should figure they know their stuff and just take what they give me?

Only one time have I seen a bonded lining come loose and that was, I think, from running my rear axle into the lake launching boats then setting the parking brake against the wet lining and leaving it a long time. In fact I recall the brake on one side wouldn't release - had to drive it off - so maybe that broke the bond. That's what happened anyway not sure why.

All the big rigs I ever worked on had rivited linings but they got way hotter than any 4-wheeler rig.
 
  #8  
Old 11-29-2010
OTRtech's Avatar
Member
Join Date: Mar 2007
Location: Upstate,NY
Posts: 2,598
Likes: 0
Received 11 Likes on 11 Posts
Over the years I've had more than a few bonded shoes come loose but never riveted ones , unless they were ignored for too long .
Granted , they wear down and can groove the drum , but if you let them get that far you are not inspecting your vehicle properly.
I'll take riveted shoes over bonded any day.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Desert_Roller
OLD - Interior, Exterior, Electrical, & Misc.
0
02-19-2012 05:39 PM
Taylor
General Ford Ranger Discussion
11
02-04-2011 09:22 PM
Ranger00
Drivetrain Tech
13
11-06-2006 08:38 AM
Jeffro
Wheels & Tires Semi-Tech
27
01-16-2006 05:45 PM



Quick Reply: Rivited Brake Shoes?



All times are GMT -6. The time now is 01:14 AM.