General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Bought a $500 94 ranger 4x4 today. School me

Thread Tools
 
Search this Thread
 
  #1  
Old 01-18-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Bought a $500 94 ranger 4x4 today. School me

Found it on craigslist and went and pick it up. Its a 94 white extended cab 4x4, automatic, manual windows and doors. speedo says 55k but the previous owner registered it when it was workin and it had 100k. he said he put at least 10k on it. i could care less really.

Any way what should i check on this thing, what are the common problems? i know i need to get a set of valve cover gaskets cause the drivers side is leaking. thats as far as i got today b/c it just got dark out. thanks!




 

Last edited by jake1z; 02-17-2008 at 12:28 PM.
  #2  
Old 01-18-2008
Ranger_Guy15's Avatar
Member
Join Date: Apr 2007
Location: MN
Posts: 2,827
Likes: 0
Received 1 Like on 1 Post
What kind of engine is in it?
 
  #3  
Old 01-18-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
its got a six in it. no idea what size or if they even had two diff sixs
 
  #4  
Old 01-18-2008
OTRtech's Avatar
Member
Join Date: Mar 2007
Location: Upstate,NY
Posts: 2,598
Likes: 0
Received 11 Likes on 11 Posts
#1 should be a Haynes manual.
 
  #5  
Old 01-18-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
tomorrow im gonna do a full tune up. plugs, wires, cap, rotor, oil change, seafoam, fuel filter. ill grab a manual so i can figure out how to do the valve cover.
 
  #6  
Old 01-18-2008
OTRtech's Avatar
Member
Join Date: Mar 2007
Location: Upstate,NY
Posts: 2,598
Likes: 0
Received 11 Likes on 11 Posts
Add PB Blaster to the list.2 cans.
 
  #7  
Old 01-18-2008
karrbass4life's Avatar
Member
Join Date: Nov 2004
Location: Cincinnati, Ohio
Posts: 3,072
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by OTRtech
Add PB Blaster to the list.2 cans.
no kidding there.
 
  #8  
Old 01-18-2008
gatorblue92's Avatar
RF Veteran
Join Date: Jun 2004
Location: Delaware
Posts: 8,238
Likes: 0
Received 2 Likes on 2 Posts
for that year it is either the 4.0 or the 3.0 and both are very good engines
 
  #9  
Old 01-18-2008
k.blakeley's Avatar
Member
Join Date: Apr 2007
Location: East Texas
Posts: 2,830
Likes: 0
Received 0 Likes on 0 Posts
did you buy this for a daily driver or a play toy?
 
  #10  
Old 01-18-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
i was looking at parts at advance auto online and according to the vin thing on their website i got the 4.0 i have an X in the vin but no U. the truck is oging to be a daily driver for the most part. i have an 07 wrx thats my "main" car if you want to call it that.
 
  #11  
Old 01-19-2008
Austin1's Avatar
Member
Join Date: Jun 2005
Location: Athens, Ohio
Posts: 359
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by jake1z
i have an 07 wrx thats my "main" car if you want to call it that.
wanna race? hehehe
 
  #12  
Old 01-19-2008
98TexasRanger's Avatar
Member
Join Date: Oct 2006
Location: Winchester, VA
Posts: 395
Likes: 0
Received 0 Likes on 0 Posts
Do the Seafoam BEFORE you put in your new plugs. Seafoam may foul them up. It did on my 1998 3.0
 
  #13  
Old 01-19-2008
Du510's Avatar
Member
Join Date: Dec 2006
Location: Northeast
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Inspect the leaf spring hangers.
 
  #14  
Old 01-19-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
ok so i seafoamed, changed the plugs, wires, and oil. tomorrow im gonna do the fuel filter and pcv if i can find it. didnt have a manual at the store.

my heater core is bypassed so i bought a new one. any write ups on replacing one? also my gauge cluster dosnt work so i need to find a new one or find a why its not working i check all the fuses and nothin was blown

one last thing dome light stays on any way of fixing this the fuse was out and im gussing b/c the previous guy couldnt get it to go off either..
 
  #15  
Old 01-20-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
i cant figure out what hoses i need to hook up to the heater core theres no hoses near it. ive searched the site and couldnt find anything can any one shed some light on what hoses i should be looking for?
 
  #16  
Old 01-20-2008
ChrisR1S's Avatar
Member
iTrader: (1)
Join Date: Oct 2007
Location: Kenbridge, VA
Posts: 263
Likes: 0
Received 2 Likes on 1 Post
for your dome light problem, the switch on one of your doors(door jambs) is most likely stuck in the "on" position
 
  #17  
Old 01-20-2008
zabeard's Avatar
who?
iTrader: (8)
Join Date: Nov 2004
Location: IN
Posts: 26,044
Likes: 0
Received 10 Likes on 10 Posts
spray those door switches with some wd-40 should fix the dome light problem
 
  #18  
Old 01-20-2008
KARPE's Avatar
Member
Join Date: Apr 2005
Location: Valrico, Fl 33594
Posts: 4,748
Likes: 0
Received 0 Likes on 0 Posts
Pics!!!!

How's the 4x4 working?
 
  #19  
Old 01-20-2008
01NP's Avatar
Member
Join Date: Apr 2007
Location: New Paltz, NY
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
i'm just jealous of the fact you have 4wd.. bought my 01 for 2,500 but it's 2wd. if I could convert it for 500$... lol
 
  #20  
Old 01-20-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
it was like 6 degrees out with the wind chill today so i didnt get to do anything. 4x4 works but we only go to try it on the road. im gonna do the wd40 thing. i really need to see how the heater core hoses go so i can have heat!
 
  #21  
Old 01-22-2008
bazzman1953's Avatar
Member
Join Date: Jan 2008
Location: Irontown
Posts: 91
Likes: 0
Received 0 Likes on 0 Posts
When I get home from work tomorrow I'll pop the hood on my '94 B-4000 and see what hose goes where. It's 3* out right now and dark with the current windchill somewhere around -20.
 
  #22  
Old 01-22-2008
garryyjr's Avatar
Member
Join Date: May 2007
Location: Medford, OR.
Posts: 321
Likes: 0
Received 0 Likes on 0 Posts
  #23  
Old 01-22-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
found thew hose hitng a fordforums.com pics will be up prolly tomorrow i cat find my camera all a sudden
 
  #24  
Old 01-22-2008
cowboy63645's Avatar
Member
Join Date: Mar 2007
Location: Fredericktown, Missouri
Posts: 813
Likes: 0
Received 0 Likes on 0 Posts
sounds like you got a heck of a deal on a fairly decent truck
 
  #25  
Old 02-17-2008
jake1z's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: nj
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
its been three weeks but shes done pics added to my first post. i need to do something about the rear springs one side sits higher then the other i wanna get full replacement springs sooner or later

thanks for all the help guys
 


Quick Reply: Bought a $500 94 ranger 4x4 today. School me



All times are GMT -6. The time now is 06:48 AM.