No power at the wiper motor??
#1
No power at the wiper motor??
Sorry, its a 95 pathfinder but i dont know who else to ask Im working on it for my boss. So the wipers dont work, if we put power directly from the battery to the wiper motor they turn on. But we moved the volt meter around and did not find there to be power at the motor. So the motor is good. The fuse is good. Is there a relay for them somewhere? could that be bad? what else could it be??
Thanks alot guys!!
Thanks alot guys!!
#12
so your saying at the switch, the connector that clips iinto the switch should have power on at least one of the wires. And if it doesnt what could it be? the fuse in the cab is good and there is power at that fuse
#14
#17
Ok, If i plug the connector in to the switch, and provide direct 12v power to different wires on the switch, i get different things to happen with different wires, the washer fluid squirts with one, the wipers turn on fast with one, and slow with another and so on. So, providing direct power to the connector turns **** on. Now what? Is there one main power line that goes into that switch? i need to know which one that is?
#19
lol found the problem.... his son had a system in there and he took it out. He tapped in to the fuse with the wipers on it, i realized when I was jiggleing the fuse I heard a noise. I threw a nother fuse tap on the fuse and now it works. haha sorry for the trouble but thanks alot man!! i really appreciate the help!
Thread
Thread Starter
Forum
Replies
Last Post
Jeremy102579
General Technical & Electrical
3
12-25-2007 08:20 PM