Just did the turn signal mod
#1
Join Date: May 2006
Location: Portage, IN
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Just did the turn signal mod
Well I got it in me to do the turn signal mod. Took maybe 2 hours from start to finish, counting a good hour for a lunch/warm-up break. And I took my time to solder, run wire-loom and tape everything back together neatly. Almost looks stock.
I gotta say, this is FAR better than the factory setup! If anyone's on the fence about doing this mod, DO IT! I used the writeup over at FRF as the one here won't load the images for me.
Next mod for me is probably going to be an explorer console mod... need a good place to put some switches for heated seats
I gotta say, this is FAR better than the factory setup! If anyone's on the fence about doing this mod, DO IT! I used the writeup over at FRF as the one here won't load the images for me.
Next mod for me is probably going to be an explorer console mod... need a good place to put some switches for heated seats
#5
Join Date: May 2006
Location: Portage, IN
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
I tried linking in the original post, but the board censored the website (tried going to www.********.com) in the preview. Not sure what the reasoning is behind it.
Thread
Thread Starter
Forum
Replies
Last Post
Buttercup
General Technical & Electrical
27
06-19-2005 07:37 AM