Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   General Ford Ranger Discussion (https://www.ranger-forums.com/general-ford-ranger-discussion-15/)
-   -   Yet Another Post Seeking CB Mounting Input (https://www.ranger-forums.com/general-ford-ranger-discussion-15/yet-another-post-seeking-cb-mounting-input-22603/)

pastfinder May 16, 2006 06:02 PM

Yet Another Post Seeking CB Mounting Input
 
I have no freaking idea where to mount the CB I picked up from Radio Shack. I like leaving things hidden and tucked away, mainly so people won't see something and have a desire to smash in a window. If I get an amp down the road I'm going to mount it inside the jack storage compartment (I'm moving the jack and tools to my storage box in the bed). The one place I've thought of mounting the CB is in the back of the Explorer full-length console, considering the vents back there are only for show and serve no purpose. I don't like the idea though because I have to reach back to fiddle with knobs and as much as you can do things by touch, I'd feel safer with the controls in full view.

I thought of just mounting the CB with velcro to the side of the console or to hide it in the glove box, again building off the idea of hiding things from plain view. This wouldn't work well if I have a passenger for they will have a glove box in their lap the whole trip. I might mod the wires to use a connector, but then I have to hook up and install the darn thing every time I use it. It will fit inside the console, but then I lose some of that space, plus I have to have the lid up to see the controls. Argh, I think I'll just velcro it to the side of the console. Any other suggestions, ideas? Note that I have an EATC already installed, so that slot is filled and I really don't want to remove any of the cubbies in my console (I like it way too much).

telemaster1952 May 16, 2006 08:11 PM

what about to the bottom of the dash facing up?
thats hos i have it and its not visible unless you really look for it

RockysFord May 16, 2006 08:35 PM

http://memimage.cardomain.net/member...7_271_full.jpg http://memimage.cardomain.net/member...7_270_full.jpg


Thats how i mounted mine, just throwing out ideas for you

stockranger May 16, 2006 08:56 PM

What is a good cb to get ? I know i want one but not sure what to get . the only brand i know of is cobra. I think i read that some have a much longer range and that sounds useful.

pastfinder May 16, 2006 09:10 PM

This thread is in the process of being hijacked. I'll spork your ass for that!!!


J/K, tis all good. I just got a deal on a Radio Shack one. I heard Maxon and Cobra are both good brands.

TheManInBlack May 17, 2006 04:36 AM

Ive mounted on the ceiling about 6 inches aft of the OHC and unless you bend down when your outside and look up you cant see it and plus i just tunted my window and now it is even less visible i will try to get pictures up tonite after work.

tideguyinva May 17, 2006 04:52 AM

http://img.photobucket.com/albums/v7...a/IMG_1902.jpg

04lvl2 May 17, 2006 06:59 AM

I attached mine to the underside of the armrest, unless you are looking for it you dont see it.

zabeard May 17, 2006 07:03 AM

mine is mounted on the back side of the center console, facing up.

RangerBoy03FX4 May 17, 2006 10:55 AM

mines mounted next to the airbag off switch.

RuggerNate May 17, 2006 12:51 PM

Just an idea. Mines sitting at home now, waiting to find a place to mount in the Jeep.
http://memimage.cardomain.net/member.../452031_98.jpg
http://memimage.cardomain.net/member...31_94_full.jpg

pastfinder May 17, 2006 03:37 PM

Argh....well, here are my options in my eyes:

1. Mount it to the ceiling in front of the OHC
2. Velcro it to the side of the full-length console
3. Velcro it at the bottom right of the steering column

Feedback anyone?

gatorblue92 May 17, 2006 04:22 PM

im gonna mount mine on the back of the cab between the seats

meemooer May 17, 2006 08:33 PM

2 Attachment(s)
i had mine on the back firewall.
Attachment 212585

After a few uses i realized it was inconvient[?] there. but i learned all the controls by touch, so it became easier. i now have it above the mirror
Attachment 212586
i like it there. not in my way. I do occasionally bump my head on it. ohh and the girlfriend uses the mirror alot on the pass. side, so she has to take the mic down to move the visor.

pastfinder May 17, 2006 08:41 PM

I have the OHC mounted up, so I can't put it there. I might mount it next to the OHC or right behind the sun visor.

1 loud truck May 18, 2006 06:23 AM

center console

eDg3 oF cHa0s May 19, 2006 09:21 PM


Originally Posted by 04lvl2
I attached mine to the underside of the armrest, unless you are looking for it you dont see it.

http://zeebone.com/gallery/d/23191-1...5+_Medium_.JPG

pastfinder May 19, 2006 10:06 PM

Argh, I have the other style of full length console. If I could get one of those consoles, I would and possibly swap out my full length console. Argh, the quest continues to figure out where to mount it. I'm probably going to custom glass a mount for it or make some sort of mount for it in the front compartment of the console (the part that goes flush to the dash).

Martiangod May 20, 2006 08:56 PM

GET ONE OF THESE
http://www.cobra.com/index.php?page=...duct_id=5&id=1
wORKS GREAT, AND IT IS ALL IN THE HANDSET,Takes up NO room at all, and if you unplug and tossthe handset in the glove box, nothing to be seen


All times are GMT -6. The time now is 12:09 AM.


© 2026 MH Sub I, LLC dba Internet Brands