02 Sensor Help
#1
Join Date: Mar 2011
Location: Mason, Ohio
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
#2
To check for power at the sensor use a voltmeter set to read 12V. Pull the connector to the O2 sensor and connect the red probe to the connector terminal with the Blue with Orange stripe wire and the other probe to chassis ground. Turn the ignition to run position. The meter should read 12V.
Thread
Thread Starter
Forum
Replies
Last Post
Liquidswords32
General Technical & Electrical
5
01-09-2018 03:03 PM
JOHN PERRETTE
4.0L OHV & SOHC V6 Tech
6
06-25-2008 03:09 PM