General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Lost vacuum to A/C control head

  #1  
Old 09-07-2010
allstateguy's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Lost vacuum to A/C control head

everything blows through the defroster vents, makes A/C very inefficient in AZ heat.

I see the lines on the manifold on DS (this is a 95 4.0) that look fine.

I don't hear any vacuum hissing behind dash. Does anyone know the routing of the vacuum hose that comes in behind the dash to feed the HVAC panel? The service manual and AllData are no help at all.

TIA
 
  #2  
Old 09-07-2010
j99ranger4x4's Avatar
Member
iTrader: (5)
Join Date: Sep 2008
Location: Delaware, OH
Posts: 1,381
Likes: 0
Received 1 Like on 1 Post
their under and behind the dash, a couple come in through the passenger side near the fuel shut off switch. i think they go up behind the glove box and over.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Last_Level_II
General Technical & Electrical
13
02-14-2015 05:48 AM
lsf53
General Technical & Electrical
2
06-02-2010 04:30 PM
rangerrob
2.9L & 3.0L V6 Tech
1
02-20-2006 01:23 PM
rangeon99
4.0L OHV & SOHC V6 Tech
20
12-04-2005 01:36 PM
GVSU Godfather
Audio & Video Tech
23
05-29-2005 06:39 PM


Thread Tools
Search this Thread
Quick Reply: Lost vacuum to A/C control head



All times are GMT -6. The time now is 10:02 AM.