Removing tie rod
#1
#10
I wanna say I saw it at Lowes but don't quote me on that.
#16
AeroKroil is teh shiz! We use it at work and it's awesome. So good it'll loosen permanent marker off your paint!
BTW, That pic is of a pitman arm puller, the pickle fork is the split wedge looking thing that you hammer in to separate the joint from the knuckle, but it usually ruins the boot.
BTW, That pic is of a pitman arm puller, the pickle fork is the split wedge looking thing that you hammer in to separate the joint from the knuckle, but it usually ruins the boot.
#18
#20
#23
Why do you need to remove it? I did my AS leveling kit with it still attached. I guess since the spring is moved up higher on the strut the whole assembly becomes longer. I had to buy a socket to get mine apart. I though one side was 30mm, not sure of the top of my head. Also a breaker bar will be necessary, even if you have an air gun. When re-tightening, retorque that lower bolt and nut to 351 ft-lbs.
#24