'04 OEM Foglight Switch Help
#1
'04 OEM Foglight Switch Help
Can anybody help me out? I've added a second OEM foglight switch to my bezel to run a set of Hella 500s. I have the pigtail for the switch from the donor truck. Does anybody have the color codes for the wiring-as far as which wire is used for which function: Dash lighting, indicator light, ground, power, ect. I tried a search, but didn't have any luck.
Thanks
MikeR
Thanks
MikeR
#4
im trying to do the same thing... what wires do i need to hook to what.. Ive had the hellas wired in for a year with the hella switch. I found a foglight switch bezel and im adding it on(doing LED mod too) I have the harness hooked up in the truck the way it came from the factory.
If i plug the switch in without any modifications and then turn on my headlights the switch illuminates. Which wires do i need to clip and tap into to make it work.
I have 3 wires going to my lighted hella switch
The hellas are relayed to the parking lights
I had added factory fogs and relayed those to the parking lamps
If i plug the switch in without any modifications and then turn on my headlights the switch illuminates. Which wires do i need to clip and tap into to make it work.
I have 3 wires going to my lighted hella switch
The hellas are relayed to the parking lights
I had added factory fogs and relayed those to the parking lamps
#5
Thread
Thread Starter
Forum
Replies
Last Post
2001fordranger
General Technical & Electrical
6
09-28-2010 10:35 AM
2001fordranger
OLD - Interior, Exterior, Electrical, & Misc.
3
08-09-2009 08:05 PM