Adding Power Mirrors '05 Edge
#1
Adding Power Mirrors '05 Edge
Can anyone help me out here? I am adding power mirrors to my 2005 Edge and I need a wiring schematic. I can't seem to find one that is legible. The switch I bought is a Dorman 901-332...that is the switch they said fits my '05. It is a 8 cavity connector with a little dog leg at one end.
I have found one schematic online, but I am not convinced it is for a 2005 or even for a ranger. It is not very clear and impossible to read. If someone could help me out here, I would really appreciate it.
Thanks to all for taking the time to read this and offer solutions.
I also need the connector for the switch! Help!
I have found one schematic online, but I am not convinced it is for a 2005 or even for a ranger. It is not very clear and impossible to read. If someone could help me out here, I would really appreciate it.
Thanks to all for taking the time to read this and offer solutions.
I also need the connector for the switch! Help!
#2
#3
This will be a valuable site for me in the future.
I did find the connectors, but had to resort to using the Ford Pigtail kits - very expensive. I would much rather have had the connector and terminal manufacturer and their part numbers - I could have sourced them for much less. But hey, I have them now.
This is the site for the Ford Pigtail catalogue:
https://www.fordparts.com/FileUpload...ook%202016.pdf
Thanks again to Soledad!
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: Newer Mirrors, Pwrd ’06 + Mirrors - MA
Scrambler82
OLD - Interior, Exterior, Electrical, & Misc.
53
07-24-2012 07:36 AM
Rentz
OLD - Interior, Exterior, Electrical, & Misc.
2
04-25-2011 09:06 AM
FMD
General Ford Ranger Discussion
16
03-31-2011 12:02 PM
yellow_tremor_03
Exterior Semi-Tech
2
02-01-2011 08:42 AM