clockspring took a **** on you...your horn/cruise shouldnt work either

 

Damn. I didn't feel like doing that this week.

Thanks for the help.

 

1999 ranger 4x4 3,0 v6 auto trans,, thanks thanks red

 

low resistance in the pass airbag circut

or low resistance across pins 8 and 9 on the RCM

 

ok how do i fix it ,thanks

 

About two weeks ago my air bag light started flashing. I noticed that it would flash 7 times, and then 4 times, and then stay lit. I figured that meant something. Sure enough, a Google search led me here! Previous posters mentioned that this combination of flashing lights is associated with the passenger side seat belt pretensioner. I got underneath the seat, unplugged the connector, and plugged it back in. Problem solved.

 

a little while ago my airbag light started flashing 1-9, but the problem is that it's not throwing a check engine light saying the rcm is full. fuses are all good and i tried wd40 in the connector like the underseat, but that didn't work. short of replacing the module and/or tearing apart my whole dash chasing wires looking for a bad connection, any ideas of a way to fix it?

also should mention that the horn and cruise and everything works

 

Me too with Code 24....help!

 

I am probably doing this all wrong, but I need help in finding out what the airbag system is trying to tell me code is 3 - 2 . I had the crimes & after reading others that about the crime ,I replaced the light , bulb ,now I have a code , & don't know where I turn next. any help could be usefully. My truck is 1997 ranger xlt 2.3l 5 speed 2 wd , can anyone point me in the right direction ? Thank You for any help

 

This is definitely an old thread but I've read through 3 3 code I think its drivers side any help thanks in advance 1996

 

try the clock spring, I had the crimes , ,lights & codes. it all came down to the clock spring, found mine on ebay check code on spring for the right one

 

have a 1998 Ford ranger 2.3 L had a wreck on right side deployed the passenger airbag replaced the airbag replaced the sensor on the radiator shroud tried to reset airbag that did not work still get a 19 code. What do I do next thank you