air conditioning oil , how much?
Thread Starter
|
Member
Joined: Apr 2007
Posts: 156
Likes: 0
From: torrington ct
air conditioning oil , how much?
how much oil is required on a 97 a/c system i am putting the pump back on so i am assuming its dry. so far i put 1 oz. on the pump but i dont think its going to be enough.
Member
Joined: Oct 2005
Posts: 2,804
Likes: 6
From: Northern IL
µ 1. Note:
Service A/C compressors are shipped without compressor oil.
Rotate the A/C compressor shaft six to eight revolutions while collecting oil in a clean measuring device.
l If the amount of oil drained from the old A/C compressor is between 85-142 ml (3-5 ounces), pour the same amount plus 30 ml (1 ounce) of clean PAG Compressor Oil, YN-12C (F7AZ-19589-DA) or equivalent meeting Ford specification WSH-M1C231-B into the new A/C compressor.
l If the amount of oil that was removed from the old A/C compressor is greater than 142 ml (5 ounces), pour the same amount drained of clean PAG Compressor Oil, YN-12C (F7AZ-19589-DA) or equivalent meeting Ford specification WSH-M1C231-B into the new A/C compressor.
l If the amount of oil that was removed from the old A/C compressor is less than 85 ml (3 ounces), pour 85 ml (3 ounces) of clean PAG Compressor Oil, YN-12C (F7AZ-19589-DA) or equivalent meeting Ford specification WSH-M1C231-B into the new A/C compressor.
Service A/C compressors are shipped without compressor oil.
Rotate the A/C compressor shaft six to eight revolutions while collecting oil in a clean measuring device.
l If the amount of oil drained from the old A/C compressor is between 85-142 ml (3-5 ounces), pour the same amount plus 30 ml (1 ounce) of clean PAG Compressor Oil, YN-12C (F7AZ-19589-DA) or equivalent meeting Ford specification WSH-M1C231-B into the new A/C compressor.
l If the amount of oil that was removed from the old A/C compressor is greater than 142 ml (5 ounces), pour the same amount drained of clean PAG Compressor Oil, YN-12C (F7AZ-19589-DA) or equivalent meeting Ford specification WSH-M1C231-B into the new A/C compressor.
l If the amount of oil that was removed from the old A/C compressor is less than 85 ml (3 ounces), pour 85 ml (3 ounces) of clean PAG Compressor Oil, YN-12C (F7AZ-19589-DA) or equivalent meeting Ford specification WSH-M1C231-B into the new A/C compressor.
Thread
Thread Starter
Forum
Replies
Last Post
Fordnut
General Technical & Electrical
10
Oct 27, 2008 08:22 AM
Prerunner-Ranger
General Technical & Electrical
21
Aug 16, 2008 09:04 AM
tbird2340
General Technical & Electrical
19
Jun 18, 2007 08:52 AM
