ok so i cranked my bars today. I took my measurements and the driver side was 1 1/4 inches lower than passanger side.So i cranked away and to even it out i had to crank the drivers side til the screw just about bottomed out. Is that safe/normal???

 

Sounds like you need to replace your t-bars. What year is your truck, mileage etc...?

 

truck is a 03 edge with 67000 miles. now that i finished the back side is 35 in. from the ground and 34 in. in the front

 

driverside always has a sag.....they are cranked for than the right from the factory. maxed out driverside means warn down bars and eventual replacement of the bars are needed. BUT...it's perfectly fine maxed out.

 

thanks man...where could i get a set ??

 

Ford

 

theres no aftermarket???

 

I would imagine so, Google it or call your local parts house.

 

I just swaped my sagging #F bars /w 65000 on them for new #1's couldnt find any aftermarket they were $90 each @ the dealer