I have a 2003 Ranger XLT FX4 (1FTZR45E43PA03780) I replace fog lights, (passenger side had broken lenses but work , driver side was full of moisture and did not work) ( fog lights working as should) shortly after that I noticed I had no turn signals or hazard lights. I bought the vehicle used and have not had it on the road yet, so I really don't know if these lights worked before I replace fog lights or not.
I unplugged the fog light still no turn signals or hazard lights I visually check the related fuses in the interior fuse box, Also replace turn signal relay, and turn signal switch. While replacing turn signal switch, I notice a burn spot on the electrical terminal connector part# wpt179, this burn spot is between the terminals that handle the red with yellow stripe wire and the red with black strip wire. I replace that connector, still no turn signals or hazards. Any help would be greatly appreciated!!
Bill Zirkle, Rapid City, Mich.
billz@torchlake.com