General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

air bag light?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-31-2007
rdy4mud's Avatar
Member
Thread Starter
Join Date: Jun 2006
Location: Howell, NJ
Posts: 252
Likes: 0
Received 0 Likes on 0 Posts
air bag light?

Hey guys im having trouble, when i bought my truck about 6 months ago my air bag light on the cluster was on. The techs at the dealership had told me it had to do with some kind of sensor that was in the seat belt reciever on the passenger side. They replaced it and reset the ECU and it had stayed off but for the past 2 months the light decides to come on whenever it feels like it. Im not too worried that it is a problem with the operation of the airbag, just probably a sensor or something but its annoying seeing a flashing orange light on your dash! does anyone know what it could be or have had this problem? thanks - Jay
 
  #2  
Old 02-01-2007
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Originally Posted by rdy4mud
Hey guys im having trouble, when i bought my truck about 6 months ago my air bag light on the cluster was on. The techs at the dealership had told me it had to do with some kind of sensor that was in the seat belt reciever on the passenger side.
If it's the same problem as before, you should have flash code 4-7. You can confirm that by counting the flashes of the airbag light immediately after startup.

Codes 4-6 (DS) and 4-7 (PS) are the most common restraints codes on 2001+ Rangers. They almost always occur because of a poor connection at the plugs under the seat.

Before we go any further, you need to check the flash pattern to get the code and post it here. We can help you figure it out.
 
  #3  
Old 02-08-2007
One L1ter's Avatar
Member
Join Date: Feb 2007
Location: Des Moines Iowa
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
I have the 4-7 flashing. I just bought my truck yesterday. The person i bought it from said the light just came on. I counted the flashes to verify. I do have an extended warranty but the deduct is 100 bucks no matter what. Is this an easy fix? I did get 500 bucks taken off the price of the truck because of this. But if it is just a bad connection somewhere?
 
  #4  
Old 02-09-2007
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Code 4-7 is for the passenger side seat belt pretensioner circuit. It is almost always caused by a poor connection at the 2 wire sensor under the PS seat. Often, simply opening the connector and plugging it back in will get the light to go off, at least temporarily. A better fix is to coat the pins inside the connector with dielectric grease before reassembly. In rare cases, if the light continues to come on, it may be necessary to splice in a repair connector and that is more work and expense.

The Restraints Warranty is 5 years/50,000 miles from original delivery. If your truck is within both of those limits, the repair is covered with no deductible, even if you are not the original owner. If you don't know the truck’s delivery date, a Ford dealer service department can look it up on the OASIS computer system.
 
  #5  
Old 02-09-2007
One L1ter's Avatar
Member
Join Date: Feb 2007
Location: Des Moines Iowa
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
i took it apart and put some grease in there and reset the battery. Its off now, we will see how long it lasts!
 
  #6  
Old 03-25-2007
JD's Avatar
JD
JD is offline
Member
Join Date: Jun 2005
Location: Yukon, OK
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Out of no where mine started doing that today. I went and counted the flashes. It appears to be a 4-5, 4-6 and 4-7. Are all these the same?
 
  #7  
Old 03-25-2007
V8 Level II's Avatar
RF Veteran
iTrader: (4)
Join Date: Nov 2004
Location: Michigan
Posts: 7,910
Likes: 0
Received 23 Likes on 20 Posts
Originally Posted by JD
Out of no where mine started doing that today. I went and counted the flashes. It appears to be a 4-5, 4-6 and 4-7. Are all these the same?
Code 4-6: Driver side seat belt pretensioner circuit resistance
Code 4-7: Passenger side seat belt pretensioner circuit resistance

Both are very common on 2001~2003 Rangers and both are usually due to problems with the electrical connectors under the seat. Check my post above for possible fixes.

My information says that airbag code 4-5 does not exist for a 2001 Ranger. Recheck the flash count.
 
  #8  
Old 03-25-2007
JD's Avatar
JD
JD is offline
Member
Join Date: Jun 2005
Location: Yukon, OK
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
I went out and tried that on both sides. It appears to have fixed the problem.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FlounderFX4
General Technical & Electrical
61
03-23-2020 05:19 PM
B737
General Ford Ranger Discussion
45
05-23-2014 01:25 PM
TrucknGolf
General Ford Ranger Discussion
8
12-14-2008 07:10 PM
Fx4wannabe01
General Technical & Electrical
18
03-23-2006 05:53 AM
ranger024x4
General Technical & Electrical
9
02-07-2005 10:33 PM



Quick Reply: air bag light?



All times are GMT -6. The time now is 05:24 AM.