DDM HID Hi/Low Kit
 

So I just switched out my old DDM 35w lows with DDM 35w hi/lows but the there is 3 wires I have to hook up in a blue headlight clip. Anybody know how the 3 wires hook up in the clip?

White?
Orange?
Blue?

:shrug:

from left to right
White, Blue, Orange
Attachment 95256

Thank you

Just hooked them up but my hi/low is opposite. Such as low beams are high and high beams are low. The high beam light is on when my low beams of my hids are lite. How do I fix this?

Blue should be middle so switch white and orange.

Just changed it to White, Orange, Blue. Still backwards.

What about Orange, Blue, White?

I know you said your doing this left to right but do you mean by standing in front of the clip (open end) or flat flush end?

Like in the picture flat side up and clip side up

Ok so as if you where standing behind the flat side.

yup

Nope

ok so we've done
White, Blue, Orange
Blue, White, Orange
White, Orange, Blue.
Orange, Blue, White

how about
Orange, White, Blue

we got to be getting close! lol

I need somebody who has the 35w DDM HID Hi/Low kit!!!

I take it that didn't work.

your only option left is
Blue,Orange,White


and I've got the 35W Hi/lo Kit but my wires were red,white,black

I gave up, Im pissed. Im guessing it doesnt matter how its hooked up as long as they work for now.

what's it doing? when you have them right you lows will be lows for your Hi's you'll have you push the stick forward. If you pull back on the lever for flash to pass and you get nothing you have them right.

When its on Lows the lights are wicked bright and alot of distance. When I flick to Hi it goes low to the road.

when your lows are on, is you high beam indicator lit on your dash?

Make sure you post some output pictures. Cause no one will post Hi/Low configuration against a wall and on the road with the DDM setup.

no

I will do that as soon as somebody can help me with this. I had the lows before but now my GF is gonna drive my truck for the winter so time to stop slacking lol

Then you have them wired up right, when you push the lever forward do the bulbs move and you Hi indicator come on?

Yes but I can tell they arent wired right cause I get more distance with the highbeam dash light off. I can see where the beam is with the dash light on (low beams) cause the hid lights drop in front of the truck. With the dash light off you can tell its the high beam. I know it sounds confuesing. :dunce:

I'm thinking about getting this kit soon so I hope we can both get it right!

Still no luck?