Open Loop / Close Loop indicator light???
#1
Open Loop / Close Loop indicator light???
I was thinking, does anyone know what the ecu pinout is that I need to tap in order to steal the WOT signal for the ranger? I'm sure its different for different ECU's. I was thinking of running a relay to it to trigger some LED's installed on my dash...
Green when I'm running partial throttle (closed loop tune)
Red when I'm running WOT (open loop tune)
Thought it might be a cool mod to have, and a useful one too!
I can tie the WOT signal to a wideband and trigger my laptop to log it and see if there is opportunity to get more power by modifying the AFR..
Just an idea...
Green when I'm running partial throttle (closed loop tune)
Red when I'm running WOT (open loop tune)
Thought it might be a cool mod to have, and a useful one too!
I can tie the WOT signal to a wideband and trigger my laptop to log it and see if there is opportunity to get more power by modifying the AFR..
Just an idea...
#3
full throttle could actuate it.
Thread
Thread Starter
Forum
Replies
Last Post
Scrambler82
Interior, Exterior, & Electrical
2
09-12-2010 09:06 AM