Which color wire gets the resistor?
#1
#2
#4
#5
Resistors go on the ground side, which should be the black wire.
The flasher is under the dash on the driver side. The knee board needs to be removed for best access. Its a yellow relay sized box plugged to the harness. Its the best way to do this.
Resistors sadly cost more than the new flash and are harder to install.
The flasher is under the dash on the driver side. The knee board needs to be removed for best access. Its a yellow relay sized box plugged to the harness. Its the best way to do this.
Resistors sadly cost more than the new flash and are harder to install.
#7
Thread
Thread Starter
Forum
Replies
Last Post
95Rangerjunkie
SOHC - 2.3L & 2.5L Lima Engines
14
06-26-2008 12:01 PM
RedPowerRanger
General Technical & Electrical
3
01-28-2007 05:25 PM
Wowak
General Technical & Electrical
9
09-22-2004 08:37 AM