SAS: affordable?
#1
SAS: affordable?
everybody has discussed these SAS swaps up front on Rangers. wut is the typical price range to do this? are you able to do the swap on an IFS 02+ Ranger? anyone that knows something, please reply. I don't want any bad mouthing. I want advice (whether bad or good) and FACTS to back up your opinion. thanks in advance
also, if the swap is feasible, could it be done in a week?
also, if the swap is feasible, could it be done in a week?
#4
Good luck with it :
www.offroadrangers.com
you might want to check out TRS
Heres a forums just for "Xtreme suspensions"
http://www.therangerstation.com/foru...p?showforum=18
www.offroadrangers.com
you might want to check out TRS
Heres a forums just for "Xtreme suspensions"
http://www.therangerstation.com/foru...p?showforum=18
Last edited by RanJerEDGE; 01-30-2005 at 05:00 PM.
#5
bad mouth - bad mouth - bad mouth - bad mouth - bad mouth - bad mouth ... etc.
I just had to do it because you said not to. TAKE THAT! HA!
I'd love to do it, but I think instead I'll just get a Cherokee and build it and keep this truck as it is.
Edit: On a more serious note: no one can tell you how feasible it is. The feasibility depends on the resources you have: money, time, sources or parts, and the skills to assemble it. Depending on your supply of these things, it may be feasible for you or not.
Generally, without a lot of help and/or skill or money to pay an expert, it's not a weekend swap, so you need to be without your truck for awhile -- keep that in mind also.
I just had to do it because you said not to. TAKE THAT! HA!
I'd love to do it, but I think instead I'll just get a Cherokee and build it and keep this truck as it is.
Edit: On a more serious note: no one can tell you how feasible it is. The feasibility depends on the resources you have: money, time, sources or parts, and the skills to assemble it. Depending on your supply of these things, it may be feasible for you or not.
Generally, without a lot of help and/or skill or money to pay an expert, it's not a weekend swap, so you need to be without your truck for awhile -- keep that in mind also.
#6
good one n3elz.
im not sure i want to go through with it but im wanting a lift and IFS lifts are expensive and straight axles are good in mud. my friend across the street has a cherokee. havent had time to really look at it but it is a 96 i believe so if they still had straight axle back then. its AWD and he wants to go big so im gonna watch and help it grow.
im not sure i want to go through with it but im wanting a lift and IFS lifts are expensive and straight axles are good in mud. my friend across the street has a cherokee. havent had time to really look at it but it is a 96 i believe so if they still had straight axle back then. its AWD and he wants to go big so im gonna watch and help it grow.
#8
#9
Originally Posted by loneFX4
thanks for the offer trevelyn but i got my ranger how i want it except for its ground clearance and not enough power(but when is it ever enough) plus i complain enough about gas with my v6.lol. anyone else here refuse to put anything lower then plus in their truck?
Last edited by ExtremSOHC; 01-30-2005 at 06:45 PM.
#10
Originally Posted by loneFX4
thanks for the offer trevelyn but i got my ranger how i want it except for its ground clearance and not enough power(but when is it ever enough) plus i complain enough about gas with my v6.lol. anyone else here refuse to put anything lower then plus in their truck?
"Premium, in fact, sometimes is worse fuel than regular. It resists knock because it's harder to ignite than lower-octane fuels. As a result, some engines won't start as quickly or run as smoothly on premium, notes Gibbs, the SAE fuel expert.
High-test does have a potential fuel economy benefit. It is slightly denser than lower-octane gas, meaning there's a little more energy in a gallon. But the small difference is hard to measure in real-world use, and that same density can contribute to undesirable buildup of waste products inside the engine.
No data show that engines designed strictly for regular run better or longer on premium.
The Federal Trade Commission, in a consumer notice, emphasizes: "(I)n most cases, using a higher-octane gasoline than your owner's manual recommends offers absolutely no benefit. It won't make your car perform better, go faster, get better mileage or run cleaner."
source - http://www.usatoday.com/money/autos/...emiumgas_x.htm
Just copied that for you. Also, addidnt additives to your gas do help though. But those bottles that you add to a full tank of gas, they clean injectors and themselves help on mileage. But you're running premium is simply a waste of money. It also probably makes you lose slight power, not enough to even notice though.
Also guys, just to combine another "performance upgrade" into the not needed category, don't upgrade your spark plugs/wires. If you're replacing them, then yes do that but the gains of new spark plugs only last a short while. And simply, you cannot upgrade spark plug wires. They have volts in the tens of thousands running through them and they are simply the best your engine can have.
Aaron
#11
back to the SAS... if you wait around and look you can find the axle for cheap, but the whole swap take a lot of fabrication and custom built stuff, its not a bolt in thing. the bottom line is, if YOU dont have the TIME or KNOW HOW to do it yourself, youre looking at spending mucho $$$$ on having someone else do it. in which case you may find its not worth it. you could probably buy an expensive lift for your truck for less than getting an SAS to work for you well enough in a daily driver
#12
yea..ive decided not to do it. most front axles ive seen have 6" and up lifts. i dont want that much for the time being. ill be happy with a bar crank and add a leaves. need help on those matters too. like how far should i crank in matters of twists of the wrench and how not to do it. ive also had trouble find add a leaves. any help would be appreciated.
now on the gas thing i meant the middle grade. not 93 octane. ive read my owners manual cover to cover a few times and it says the truck is designed to run on regular gas but it is not recommended. the one time regular was in my truck it brought about knocking and such. so i said never again.
now on the gas thing i meant the middle grade. not 93 octane. ive read my owners manual cover to cover a few times and it says the truck is designed to run on regular gas but it is not recommended. the one time regular was in my truck it brought about knocking and such. so i said never again.
#13
thats strange with the gas thing, the 4.0s usually dont have any knocking problems. tomorrow ill write a nice thread on the torsion crank, id ont have time tonight. also, in the other thread i gave you the explorer pro comp part number 13120 for the add a leafs
also checked on your cams, youre looking at probably 2000 installed, custom ground. good sources tell me its not worth the money for the minimum gains youll see
also checked on your cams, youre looking at probably 2000 installed, custom ground. good sources tell me its not worth the money for the minimum gains youll see
#14
Join Date: Oct 2004
Location: Coal Region, MTC to be exact...heart of the coal region.
Posts: 2,232
Likes: 0
Received 4 Likes
on
4 Posts
if u had a TTB front i could help u out. this new IFS im totally lost. seems an SAS would require a good bit fab work like welding coil buckets to the frame, track bar and lets not forget that stupid friggen rack steering...how to get that to work with the SA? i dunno...seems a big hassle.
for me on my truck its pretty simple and i can resue my coil buckets, steering and such. ill have an SAS before fall hopefully =-D
oh and christian...wanna sell ur 77?
for me on my truck its pretty simple and i can resue my coil buckets, steering and such. ill have an SAS before fall hopefully =-D
oh and christian...wanna sell ur 77?
#17
#19
#21
Originally Posted by Trevelyn1015
i would never drive from texas to alaska... for anything...
Just a comment on the octane issue. I've been putting 87 in my truck from day one and never had a problem. Everything I've seen or read says that 87 is what the truck is designed to run on. If you're having probems w/ 87 I would suggest you see a dealer!
#22
seeing as im already in the process of doing this ill add my input.
im trying to complete a sas with 8" of lift or so for like 2 grand. i have a friend who is welding for me and all the work will be done in my driveway. my parts list is as follows
long arms 800
coils 200
d30 axle free
steering box 400
custom coil buckets 100
misc metal 100
400 for everything else little like bolts and other odds and ends. and driveshaft
30 for beer for payment of the welding
i lucked out and i am getting a free axle, i also work at a hardware store and get discounts on grade 8 stuff
thats not including the 36" tires i just bought for it. which i got for 575.
you could run leafs too but i decided to run coils for their flex. have to keep up with my buddy's coil over wrangler.
Andrew
im trying to complete a sas with 8" of lift or so for like 2 grand. i have a friend who is welding for me and all the work will be done in my driveway. my parts list is as follows
long arms 800
coils 200
d30 axle free
steering box 400
custom coil buckets 100
misc metal 100
400 for everything else little like bolts and other odds and ends. and driveshaft
30 for beer for payment of the welding
i lucked out and i am getting a free axle, i also work at a hardware store and get discounts on grade 8 stuff
thats not including the 36" tires i just bought for it. which i got for 575.
you could run leafs too but i decided to run coils for their flex. have to keep up with my buddy's coil over wrangler.
Andrew
#23
Join Date: Jun 2004
Location: outside Detroit, where it's safer
Posts: 874
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by NHBubba
I'd do it just for the cost of gas! For the opportunity to drive through.. nevermind, just to SEE Alaska I'd gladly do it!
Just a comment on the octane issue. I've been putting 87 in my truck from day one and never had a problem. Everything I've seen or read says that 87 is what the truck is designed to run on. If you're having probems w/ 87 I would suggest you see a dealer!
Just a comment on the octane issue. I've been putting 87 in my truck from day one and never had a problem. Everything I've seen or read says that 87 is what the truck is designed to run on. If you're having probems w/ 87 I would suggest you see a dealer!
Thread
Thread Starter
Forum
Replies
Last Post
patkelly1336
4.0L OHV & SOHC V6 Tech
3
07-30-2011 04:12 PM
Kelt
General Ford Ranger Discussion
3
12-06-2006 03:58 PM