|
Fog lights on a non fog light truck...
I've got a 2000 ranger that did not come factory with fog lights. I am wanting to purchase the factory lower valance with fog light holes and add factory fog lights to my truck. What would be the best way to wire up these lights? I was wondering if I could possibly wire them in so that my factory light switch would turn them on? :shrug:
|
this is bascilly what im doing too. its possible, and i PM'ed a buy on here about it and he was kind enough to make a diagram for me, i'll forward it to you, i haven't done it YET, but heres what he sent me...
HOLD ON.... |
Alright, i just copy and pasted it so here is, im not sure if its the same on your 2000, so hopefully someone can chime in and help ya outty...
Originally Posted by rwenzing
Originally Posted by ranger_banger
well, you seem to be pretty knowledgeable about electrical stuff. I've seen some of the mods you've done on your truck, so i think this should be pretty easy for you.
i have a 94 ranger with out the fog lights, and im going to get them tomorrow ish, sometime this week, but i want to be able to turn them on with my parking lights and/or headlights. there will be a another switch in case i just want the parking lights, then i can flip the switch and have fogs and parking lights. well, any idea on how to like, splice off the parking lights switch, into a relay or something, to power the fog lights? hope i was clear enough, if not i'll try to to explain a little deeper. thank you The fogs would be allowed whenever the parking or headlights are on, high or low beam. To provide a way to turn them off, a switch could be put in series with the relay coil. This is basically what you want except with the green wire attached to the brown at the H/L switch. http://www.accessconnect.com/images2...%20install.jpg Make sure that you adequate wire gauge, correctly fused near the source. Bob |
| All times are GMT -6. The time now is 06:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands