93 Ranger Power problems
#1
93 Ranger Power problems
My Engine hesitates going over bumps, it seems electrical. So I opened the hood and tried checking all the grounds, plug wires, etc. Nothing seemed to give any problems So I then tap lightly on the power distribution box, and everytime I tap it, the engine starts to stall, just like when going over bumps.
Just a couple relays in there, as well as a few fuses. Any idea how to proceed? Shouild I just start replacing relays? Look for a replacement box at the junk yard?
Just a couple relays in there, as well as a few fuses. Any idea how to proceed? Shouild I just start replacing relays? Look for a replacement box at the junk yard?
#2
I'd do a lot of inspecting and wiggling, while it's running (or use a test light to see when the power flickers).
This could be a simple as a bad contact for the PCM or FP relay, bad feed wire/terminal to the box, bad relay itself, etc.
I'd suggest pulling the PCM Power Diode and checking its contacts too. I've heard of them coming loose.
This could be a simple as a bad contact for the PCM or FP relay, bad feed wire/terminal to the box, bad relay itself, etc.
I'd suggest pulling the PCM Power Diode and checking its contacts too. I've heard of them coming loose.
Thread
Thread Starter
Forum
Replies
Last Post
JGod
General Ford Ranger Discussion
3
02-08-2014 06:35 AM