Toyota IFS box
#1
Toyota IFS box
Out of everyone's projects whom are using Toyota IFS boxes (mostly for SAS's), I know this subject has been touched upon as a cliff note, but what is being used to hook up the power steering lines to the box?
I personally used Earl's AN fittings that a local supply store in town basically custom found what would seemlingly work. I did a couple back-and-forths but evenually got what worked. With my next step being to get my box tapped for hydro, I'm just wondering what else anyone out there has that I can look to maybe try. Note: I have the earlier, 86-88 box (not that it should make a difference).
..hope that all made sense!
I personally used Earl's AN fittings that a local supply store in town basically custom found what would seemlingly work. I did a couple back-and-forths but evenually got what worked. With my next step being to get my box tapped for hydro, I'm just wondering what else anyone out there has that I can look to maybe try. Note: I have the earlier, 86-88 box (not that it should make a difference).
..hope that all made sense!
Last edited by 2002FX4; 02-15-2008 at 12:20 PM.
#2
I just had a thread on this... well not the hydro assist lines but the fittings. You need to talk to PSC Motorsports they seemed to know what they were talking about when I called them, pretty cool guys too.
For anyone else needing the info
Power Steering Box AN-Fittings
http://www.pirate4x4.com/forum/showthread.php?t=495627
http://www.pirate4x4.com/forum/showthread.php?t=617050
High Pressure Port - 16 x 1.5 MM Inverted Flare to #6 JIC Male adapter, Toyota - 'PSC Motorsports' #PSC-SF06 or 'Summit Racing' #EAR-9919DFJERL
Low Pressure Port - 17 x 1.5 MM Inverted Flare to #6 JIC Male adapter, Toyota - 'PSC Motorsports' #PSC-SF07
or
LEE MFG. CO in Sun Valley CA
818-768-0371
has
16mm x 1.5 inverted flare to #6jic for the pressure side and
17mm x 1.5 inverted flare to #6jic for the return side for
$8 each
Power Steering Box AN-Fittings
http://www.pirate4x4.com/forum/showthread.php?t=495627
http://www.pirate4x4.com/forum/showthread.php?t=617050
High Pressure Port - 16 x 1.5 MM Inverted Flare to #6 JIC Male adapter, Toyota - 'PSC Motorsports' #PSC-SF06 or 'Summit Racing' #EAR-9919DFJERL
Low Pressure Port - 17 x 1.5 MM Inverted Flare to #6 JIC Male adapter, Toyota - 'PSC Motorsports' #PSC-SF07
or
LEE MFG. CO in Sun Valley CA
818-768-0371
has
16mm x 1.5 inverted flare to #6jic for the pressure side and
17mm x 1.5 inverted flare to #6jic for the return side for
$8 each
Thread
Thread Starter
Forum
Replies
Last Post
zabeard
Fabrication & Tool Tech
54
08-14-2017 12:40 PM