LED strips on mirrors
#29
#39
Yeah I didnt put that much effort into wiring them. You cant see the wires unless you stick your head under my mirror and look for them. It'd be Very easy to hide the wires inside your mirror , it'd look good too
#40
#41
1 You have a Burned Bulb
2 You run LED signals ( they draw almost no power so it thinks you have no lights)
If you want to run Led Signal lights and corners and the mirrors like me you'll need a Napa EP-27 Flasher. But if you only have the strips with stock bulbs in front it shouldnt effect it at all.
#42
#43
You only get hyper flash if
1 You have a Burned Bulb
2 You run LED signals ( they draw almost no power so it thinks you have no lights)
If you want to run Led Signal lights and corners and the mirrors like me you'll need a Napa EP-27 Flasher. But if you only have the strips with stock bulbs in front it shouldnt effect it at all.
1 You have a Burned Bulb
2 You run LED signals ( they draw almost no power so it thinks you have no lights)
If you want to run Led Signal lights and corners and the mirrors like me you'll need a Napa EP-27 Flasher. But if you only have the strips with stock bulbs in front it shouldnt effect it at all.
*You'll need an EP-27 flasher designed for use with LED's....
#46
Yeah if you want them to signal and be park lights you need to do the signal corner mod
https://www.ranger-forums.com/forum2...hlight=blinker
Just wired them into the new wires going to the corner light. They only work if my lights are on, that may be becuase of my all LED's in front
https://www.ranger-forums.com/forum2...hlight=blinker
Just wired them into the new wires going to the corner light. They only work if my lights are on, that may be becuase of my all LED's in front
#48
Is the wire on the end of the strip?
I don't wanna have to drill more holes into my mirror
#49