Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   General Technical & Electrical (https://www.ranger-forums.com/general-technical-electrical-18/)
-   -   Light Problem (https://www.ranger-forums.com/general-technical-electrical-18/light-problem-88836/)

DKM Jun 22, 2009 04:02 PM

Light Problem
 
Hey guys,
My dashboard lights are no longer working for some reason. My headlights turn on but non of interior lights go on with them. Made it kind of tough driving home from my friend's house last night... Is there any general troubleshooting to figure this problem out? I looked through my manual, but couldn't figure out what fuse those lights use. Any help would be greatly appreciated!

Mykhael Jun 22, 2009 07:07 PM

1 Attachment(s)
Try this SJB (smart junction box) passenger side kick panel
Fuse 33 which is a 5A fuse

Attachment 150164

FullThrottle02 Jun 23, 2009 07:25 AM

Is the dimmer switch turn all the way down? If not check fuses. The bulbs may have burned out, but all of a sudden I think would be odd. I had to replaced 4 out of the 6 in mine when I bought my truck.

sarasota4x4 Jun 23, 2009 07:31 AM

that happened to me after i put in my radio.. check the fuses under the hood

DKM Jun 24, 2009 05:14 PM


Originally Posted by FullThrottle02 (Post 1378657)
Is the dimmer switch turn all the way down? If not check fuses. The bulbs may have burned out, but all of a sudden I think would be odd. I had to replaced 4 out of the 6 in mine when I bought my truck.

Yeah I checked the dimmer switch.. lol. The cab light still goes on when I turn the dimmer all the way up. I got pulled over last night because apparently none of my brake lights work as well... Dunno wtf I did, the only thing I can think of is that I hit a really big pot hole the other day. So now my truck is not drivable.. no speedometer was manageable, but lack of tail lights it too much. I'm too afraid to mess with the fuses cause I don't want anything else to break lol

red_fx2 Jun 24, 2009 05:17 PM

ya i'd start checking all the fuses.. ur manuel should have a fuse list that goes along with the fuse boxes.. just start going one by one.. i had something similar happen to me, half my gauges went out in my 03, but i just never tried to fix it.. i could still see most of everything i needed.

have u done a recent wiring? like radio? more lights? etc... something might be shorting them out. if so re-check ur wiring just to make sure

DKM Jun 24, 2009 05:33 PM

Nah man I don't mess with wiring haha I'm not too electrically savvy. Okay so when I'm going over the fuses, what am I looking for exactly?

Ford04Ranger4.0 Jun 24, 2009 05:42 PM

broken/ burn fuses

Mykhael Jun 24, 2009 05:43 PM

U might need to pull the fuse out to tell if it is broke or not

The metal part going from side to side will either be intact or broke might even have black around if it blew

BAD FUSE
http://www.societyofrobots.com/image...fuse_blown.jpg

GOOD FUSE
http://www.societyofrobots.com/image..._not_blown.jpg

97-4x4ranger Jun 28, 2009 09:03 PM


Originally Posted by DKM (Post 1380155)
Yeah I checked the dimmer switch.. lol. The cab light still goes on when I turn the dimmer all the way up. I got pulled over last night because apparently none of my brake lights work as well... Dunno wtf I did, the only thing I can think of is that I hit a really big pot hole the other day. So now my truck is not drivable.. no speedometer was manageable, but lack of tail lights it too much. I'm too afraid to mess with the fuses cause I don't want anything else to break lol


ya if you dont have dash lights then you dont have tail lights, at least on most vehicles thats how it is, i'd say you have a burnt fuse


All times are GMT -6. The time now is 06:24 AM.


© 2026 MH Sub I, LLC dba Internet Brands