OHC light issue?
#1
OHC light issue?
Hey everyone I finished up my ohc install last week. It's pretty sweet! much easier than I thought it was going to be. It fits right up against my headliner with no gaps and makes the truck look so much better. The temp. gauge was only off 1 degree from my phone. But I have a few questions still:
I pulled this from a 97 explorer and the display kinda looks green as opposed to the blue I thought it was supposed to be. seems blueish-green but maybe because I want it to be blue lol.
next issue when I hit the light button closest to the me (driver side) the light shines over at the passenger side and vise-versa when you hit the opposite light button. Is this right?
Other issue is when I open the door, only the dome light comes on and no lights from the ohc, unless you would press the light button.
Thanks for any help everyone.
I pulled this from a 97 explorer and the display kinda looks green as opposed to the blue I thought it was supposed to be. seems blueish-green but maybe because I want it to be blue lol.
next issue when I hit the light button closest to the me (driver side) the light shines over at the passenger side and vise-versa when you hit the opposite light button. Is this right?
Other issue is when I open the door, only the dome light comes on and no lights from the ohc, unless you would press the light button.
Thanks for any help everyone.
#2
Thats right. The lights are angled in such a way that the passenger side one shines towards the drivers side and vise versa. If the lights in the console aren't coming on when the dome light comes on perhaps you have a bad connection into the dome light wiring or something...might want to get in there and re-check.
#4
#5
#6
the lights are angled...IE the passenger side light is angled towards the driver's seat, and the driver side light is angled towards the passenger seat. so when you press the driver side button, the passenger light comes on. mine was this way until i put Buggman's LEDs in.
#7
Nope...the passenger side light is angled towards the drivers side so when you press the driver map light button, the passenger side bulb lights and shines light towards the driver and vise versa.
#8
#10
the lights are angled...IE the passenger side light is angled towards the driver's seat, and the driver side light is angled towards the passenger seat. so when you press the driver side button, the passenger light comes on. mine was this way until i put Buggman's LEDs in.
You realize that is what i said. You press a button and you can read a map on the side you are sitting.
#11
Thread
Thread Starter
Forum
Replies
Last Post
spankis
OLD - Interior, Exterior, Electrical, & Misc.
13
02-11-2012 09:49 AM
MugenCRX04
OLD - Interior, Exterior, Electrical, & Misc.
10
08-03-2009 07:11 PM
94greenmachine
General Ford Ranger Discussion
4
01-16-2009 09:18 PM