so i am installing an alarm, and i can not get the power locks to work. i am at a complete stand still and i need to get this done because my truck is all sorts of torn apart.

here is the paper work i have on the alarm/ special things i have to do.

http://www.nundamustard.com/Dan/alar...%20install.pdf
http://www.nundamustard.com/Dan/alarm/1093.pdf
http://www.nundamustard.com/Dan/alarm/1076.pdf
http://www.nundamustard.com/Dan/alarm/print.asp.htm

 

also here is some screen caps of the instalation guide for the door locks.

i have the power lock wire hooked to the green black wire of the harness
i have the power unlock wire hooked to the blue black wire, with a diode
i have the driver side door trigger hooked to the blue black wire with a diode
i have the purple door trigger input hooked to both driver and pass side door triggers, diode on each.


the black with white stripe i was going to hook into the wire i already have going to the dome light in the smart junction box

 

go buy the SecuriLock XK04 that is a data interface and that will work.