General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

disconnecting a/c pump

Thread Tools
 
Search this Thread
 
  #1  
Old 08-29-2010
beatupranger's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Saint John NB Canada
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Icon5 disconnecting a/c pump

is there any harm in disconnecting the harness to the a/c compressor for the winter,iam not convinced that that i need it going on and off all the time,i want to know if it will discharge or go stale or anything like that ?
 
  #2  
Old 08-31-2010
cheese_man's Avatar
Member
iTrader: (1)
Join Date: Nov 2009
Location: arthur
Posts: 2,126
Likes: 0
Received 4 Likes on 4 Posts
you should be fine doing it

you might have to recharge in the spring
 
  #3  
Old 08-31-2010
ccosgrove71's Avatar
Member
Join Date: Jun 2010
Location: richmond,va
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
so why are you disconnecting it?
 
  #4  
Old 08-31-2010
cheese_man's Avatar
Member
iTrader: (1)
Join Date: Nov 2009
Location: arthur
Posts: 2,126
Likes: 0
Received 4 Likes on 4 Posts
decreases fuel economy in cold weather
 
  #5  
Old 08-31-2010
ccosgrove71's Avatar
Member
Join Date: Jun 2010
Location: richmond,va
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
how? if its off there is no drag. the clutch it free wheeling unless its locked up or bad bearing,
 
  #6  
Old 08-31-2010
klc317's Avatar
Member
Join Date: Sep 2006
Location: Cincinnati, OH
Posts: 953
Likes: 0
Received 6 Likes on 4 Posts
Plus when you have the truck on Defrost, Floor/Vent, and Defrost/Floor settings on the HVAC it runs the A/C compressor to remove moisture from the cab to defog/frost your windows quickly. Try it out while its hot out and the temp setting on cold. You'll notice that on any setting besides just dash vents and floor the air will get cold. Otherwise, the compressor is off and just free wheeling...no loss of MPG.
 
  #7  
Old 09-01-2010
beatupranger's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Saint John NB Canada
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
i find that on any setting of the heat control (except off) the compressor goes on and off,when it turns on i can feel it in the performance of the engine,you know with a little 3.0 any drag means a loss of mpg
 
  #8  
Old 09-01-2010
beatupranger's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Saint John NB Canada
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
also if it does need recharge can i just use one of those parts stores recharge kit ?
 
  #9  
Old 09-01-2010
Blhde's Avatar
Member
Join Date: Oct 2005
Location: Northern IL
Posts: 2,804
Likes: 0
Received 3 Likes on 3 Posts
Floor only and vent only it should not run.

I like the fact i can defrost my windows quicker when its not freezing out. i really dont like to run my heat on a hot setting.

Since doing the EATC though I can turn the compressor off from inside.

If you wire up a switch on the purple wire off the controls you can do the same thing.


The recharge kit for the auto parts store will do the job. The issue is that the oil running though keeps the seals from drying out and leaking. Not sure what is true. I just run it all year if my windows fog up.
 
  #10  
Old 09-02-2010
Overkill-F1's Avatar
Member
Join Date: Aug 2007
Location: Powell River,BC, Canada
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Blhde
If you wire up a switch on the purple wire off the controls you can do the same thing.
I wired in a switch into the wire as suggested and I turn it on once and a while just to keep the fluids flowing to keep the seals from drying out. It's hard to remember, but I try to turn it on for a few minutes at least once a week.
...Terry
ps. it is not the purple wire in a '08, they changed the color of the wire. I wrote the color down, if anyone wants, I'll find my notes.
 
  #11  
Old 09-02-2010
ccosgrove71's Avatar
Member
Join Date: Jun 2010
Location: richmond,va
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
keeping the compressor on all the time will make pressures high cause it to discharge to the atmostsphere, thus the reason for low and high cut off switches.
 
  #12  
Old 09-02-2010
t5cents's Avatar
Member
iTrader: (6)
Join Date: Nov 2008
Location: Eureka, CA
Posts: 1,521
Likes: 0
Received 1 Like on 1 Post
look in the how-to's and it called like G&M ac mod or something....i think its on the second page....
 
  #13  
Old 09-03-2010
Blhde's Avatar
Member
Join Date: Oct 2005
Location: Northern IL
Posts: 2,804
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by ccosgrove71
keeping the compressor on all the time will make pressures high cause it to discharge to the atmostsphere, thus the reason for low and high cut off switches.
I think you misunderstood what wire I was talking about. Putting a switch on the purple (most years) will kill the signal to the computer. Not bypass the system.
 
  #14  
Old 09-03-2010
beatupranger's Avatar
Member
Thread Starter
Join Date: Jul 2010
Location: Saint John NB Canada
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
that sounds like the idea,if i open the wire at the computer that tell the compressor to turn on,i may save a little fuel,i can get the diagram with no trouble

another quick question-it seems that the engine wants to run at about 3000 rpm with me touching the fuel,the pedal is in the normal position-could this be LIM gasket ?
 
  #15  
Old 09-03-2010
ccosgrove71's Avatar
Member
Join Date: Jun 2010
Location: richmond,va
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Blhde
I think you misunderstood what wire I was talking about. Putting a switch on the purple (most years) will kill the signal to the computer. Not bypass the system.
gotcha my bad
 
  #16  
Old 09-03-2010
OTRtech's Avatar
Member
Join Date: Mar 2007
Location: Upstate,NY
Posts: 2,598
Likes: 0
Received 11 Likes on 11 Posts
You're up in NB. Just unplug the wire to the compressor clutch.
I've done it for years (OK,Decades) with no ill effects to the system.

Plug it back in once or twice through the winter to cycle the system for a few minutes and you'll be fine.

Note to others:
In below freezing temps , the air is already dry , using the A/C will not help dry the inside of windshield.
Overuse of the defroster , however, could cause the windshield to crack.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mike01
General Technical & Electrical
9
02-23-2024 10:09 PM
50mustangs
2.9L & 3.0L V6 Tech
5
03-10-2014 01:30 PM
Virago
Drivetrain Tech
5
11-08-2010 08:11 PM
MudSlanger
2.9L & 3.0L V6 Tech
3
08-14-2009 05:59 AM
ranger024x4
General Technical & Electrical
10
06-09-2005 07:31 PM



Quick Reply: disconnecting a/c pump



All times are GMT -6. The time now is 07:47 AM.