No brake lights
#1
05-29-2014
Join Date: Mar 2005
Location: Ky
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#2
05-29-2014
Brake light switch up near the brake pedal bar drivers side not engine side.
When brake pedal is pushed in. the switch's button is released and sends voltage to brake lights.
So 0 OHMs brake pedal pushed, high OHMs(infinite) foot off the brake.
Should be 12volts at this switch all the time, it is not key on/off powered.
Although if you have a Power Saver Relay power to the brake light switch would be off after 20 minutes with key off doors closed.
When brake pedal is pushed in. the switch's button is released and sends voltage to brake lights.
So 0 OHMs brake pedal pushed, high OHMs(infinite) foot off the brake.
Should be 12volts at this switch all the time, it is not key on/off powered.
Although if you have a Power Saver Relay power to the brake light switch would be off after 20 minutes with key off doors closed.
Last edited by RonD; 05-29-2014 at 06:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ColinGooseHall
General Technical & Electrical
8
10-08-2023 02:41 PM
Redneckstone
General Ford Ranger Discussion
4
10-07-2006 05:36 PM
barrman
General Ford Ranger Discussion
15
03-20-2006 10:20 PM
