i got one from a mountaineer, the bracket is smaller, wondering if it will fit. can post pics if need. from a 98 5.0L AWD

 

To in stall in your truck? It should be the same?! In any event, I wouldn't think it matters...

 

the actual OHC is a bit different, ill take pics for ya!

 

pictures pictures pictures.....if it is out of a '02+, then the roof lines are different...

 

read first post, its out of an 98

 

ahhhh blind

it should fit fine.....did you get a sunroof OHC?

 

heres the OHC


heres the harness for the OHC

 

ya he had a sunroof

 

Thats the sunroof one... No biggie, it will fit fine....

 

it is a sunroof OHC.....that is why the bracket is smaller.....it will take quite a bit more work to install this since the back of the bracket is held up by the headliner......if you don't use the headliner to hold it up, the back will have a gap in it and hang down....

it WILL fit with the headliner contours fine....

if i were you, i would sell this thing and get one from a Explorer/Mountaineer without a sunroof......

 

the bracket came right off the top frame! when removing it, it was 4 bolts from the top frame and it came right off!

 

and

 

then y did u say its help up by the headliner? im confused

 

if you look at the very BACK of the OHC, there is a little lip that slips up behind the headliner......the front part is held up by the bracket....THE FRONT PART ONLY.......in the picture you posted you can see the little black tab sticking out the back of he console....

 

ok i get it, thanks

 

let me find the install pics of mine, i need to put it in the how-to, but if you would have searched for sunroof OHC im sure you would have found it.

found it.
https://www.ranger-forums.com/forum2...ht=sunroof+ohc

 

thanks a lot, thats exactly what i need!

 

np man, btw you don't need that entire wiring harness, alot of that crap is for the sunroof.