flex-a-lite install help
#6
#10
battery + the B terminal on your control module with inline fuse holder, negative battery terminal to the G terminal on control module. connect the + terminal on the module to a 12 volt power source( I spliced mine in with the battery + lead to the B terminal because I wanted a constant power) You may prefer a key-hot power supply for the + terminal. From the C terminal, run a wire to the positive wire that turns the a/c compressor on. All of this info should be available with the instructions that came with your fan. I made aluminum brackets to mount the fan and re-locate my power steering bottle.
#17
unless your planning on running a switch to manual turn the fan on/off, your need there temp sensor/controller kit. They have many options, I would call flex-a-lite and ask what your best option would be. They offer a controller that is covered with a plastic box, I don't know the part number, but it comes with the flx-180, I believe that is the part you need to make your install right.
#21
Thread
Thread Starter
Forum
Replies
Last Post
SonicRanger001
Ranger Products, Company, & Member Reviews
12
07-25-2005 05:26 AM