Hey I have a 2009 SuperCab, I have tried to find a thread that covers this issue but no luck.
the power locking switch on the drivers side only locks the passenger side nothing happens on the drivers side. The passenger side unlocks and locks the passenger side only. I have tested the actuator from the drivers side and it works. I have swapped the locking switches over and iy still does the same thing. Can any one suggest what is going on here or point me in the direction of a thread that covers this?
​​​​​​​

 

Your owners manual should address how to restart/reboot all the door lock mechanisms. I had a similar issue w R psgr door. There is a proper sequence to follow which is necessary to get them all in sequence together again.
That being said, I went thru it a few times but it never worked, I still had issues. Then I got a new battery and apparently the disconnect of the battery brought everything down to normal when it was reconnected and now it's all good.
If you do disconnect the battery I'd leave it for at least a few minutes before reconnecting to let everything zero out before reconnecting. Hope this helps!