Radio Memory issues.
 

So i put a new deck in my truck. Im a cheap guy so i didnt just buy an adapter, i wired it my self. Everything works fine, except there is no memory, as soon as i turn off my truck the presets are gone, and it goes back to standby. My question is, does anyone know what wire pertains to the memory, or of a good wiring diagram online?

On the chassis harness side, you should have a Light Green with Violet stripe wire that is hot at all times (connect to radio power memory). The Yellow with Black Stripe wire is fused ignition hot in run or accessory (connect to radio 12v power). If needed, Red with Black stripe is hot in start (connect to radio power in start/crank if used).