fuel filter change... im stumped
#1
fuel filter change... im stumped
so after running my truck more to diagnose the fuel leak, i see it is squirting from the outflow nipple on the fuel filter. The hose must have come loose off the nipple somehow... is this possible?
So I decided I want to change my fuel filter to be safe. All the fuel filters at autozone or advance auto have one nipple on each side. My trucks fuel filter has 2 nipples on the side of the filter by the tank. My truck isnt a flex fuel one, so why would it be like this.
Also, what tool do I need to get those damn fittings off the fuel filter? and how is the filter held in there?
So I decided I want to change my fuel filter to be safe. All the fuel filters at autozone or advance auto have one nipple on each side. My trucks fuel filter has 2 nipples on the side of the filter by the tank. My truck isnt a flex fuel one, so why would it be like this.
Also, what tool do I need to get those damn fittings off the fuel filter? and how is the filter held in there?
#2
#3
#5
It sounds like you are looking at the fuel filters that are out by the PCV valves and air filters. You need to go to the parts counter because the one for your truck will be in the back.
You have the two nipples on one side of the filter for fuel to flow back into after the evaporative emissions control system (charcoal canister).
You will need to buy a pack of replacement clips for one of the quick disconnect fittings (the output one). They are white, and you do not get one with the new filter. Look at the white clip on the output side of the filter if you need to see what it looks like. You simply remove the white clip with a screwdriver to disconnect that line and replace with a new clip after reattaching the line.
The other two quick disconnects can be released by carefully pushing down on the orange and green colored tabs. You DO NOT remove them, you only push down on them like a button. There is a tool to release them as well, but as long as you are not prone to breaking things and are gentle, you can do it with just your hands. These two will only go back one way, so do not worry about mixing them up. Do NOT force the quick connect on the filter! If it does not attach easily, you are trying to put it on the wrong nipple. You will hear a click when it is attached.
The filter itself is just bolted to the frame rail. The whole assembly comes out and you get a new bracket with the replacement filter. Keep the nut though because you will not get a replacement nut. There is a brake line clipped into the bracket. Simply pop it out, but remember to clip it into the new bracket when you install it.
Also, remember to remove pressure from the lines. Remove the gas cap and remove the fuse for the fuel pump, then start the truck and let it die. You will still get gas on you, so protect your eyes and use common sense.
You should never ever have to force a quick disconnect line. If you do, you are doing something wrong.
You have the two nipples on one side of the filter for fuel to flow back into after the evaporative emissions control system (charcoal canister).
You will need to buy a pack of replacement clips for one of the quick disconnect fittings (the output one). They are white, and you do not get one with the new filter. Look at the white clip on the output side of the filter if you need to see what it looks like. You simply remove the white clip with a screwdriver to disconnect that line and replace with a new clip after reattaching the line.
The other two quick disconnects can be released by carefully pushing down on the orange and green colored tabs. You DO NOT remove them, you only push down on them like a button. There is a tool to release them as well, but as long as you are not prone to breaking things and are gentle, you can do it with just your hands. These two will only go back one way, so do not worry about mixing them up. Do NOT force the quick connect on the filter! If it does not attach easily, you are trying to put it on the wrong nipple. You will hear a click when it is attached.
The filter itself is just bolted to the frame rail. The whole assembly comes out and you get a new bracket with the replacement filter. Keep the nut though because you will not get a replacement nut. There is a brake line clipped into the bracket. Simply pop it out, but remember to clip it into the new bracket when you install it.
Also, remember to remove pressure from the lines. Remove the gas cap and remove the fuse for the fuel pump, then start the truck and let it die. You will still get gas on you, so protect your eyes and use common sense.
You should never ever have to force a quick disconnect line. If you do, you are doing something wrong.
#6
#7
it should look like this
it should come with two white clips
unplug the innertia switch and turn on the car until it dies. get under and unclip the old filter and remove it (there should be a hose climp holding it on.) take it out and put the new one in the same place (and the same direction). clip it in, plug in the innertia switch and start it up.
if the fuel filter is not the same as the one that is already on there....return it and make sure you get the correct one. dont try to ghetto rig it on there.
it should come with two white clips
unplug the innertia switch and turn on the car until it dies. get under and unclip the old filter and remove it (there should be a hose climp holding it on.) take it out and put the new one in the same place (and the same direction). clip it in, plug in the innertia switch and start it up.
if the fuel filter is not the same as the one that is already on there....return it and make sure you get the correct one. dont try to ghetto rig it on there.
#8
so i got this whole job done. had to snap the bolt off the old filter because it just kept spinning. i then got the clips off both the tank side lines. the engine side line was already off. so i bought a pack of the clips and new filter, put them on and put the new clamps in.
started my baby up, and no leaks! its just so funny how a lil plastic piece that costs a few cents could cause such a big problem and costs so much in gas
started my baby up, and no leaks! its just so funny how a lil plastic piece that costs a few cents could cause such a big problem and costs so much in gas
#9
Broken Fuel Filter Clips
Hi People!
I'm new to this Ranger forum...mine is a 2000 Mazda Troy-Lee, 3.0 Cab Plus, which is essentially a Ranger...
What happens if I break one of the clips (I believe an R-Clip, as the manual states)?
I just broke one while changing the fuel filter. I put the clip back on, it stays in place and I taped over it with duct tape to prevent the clip from falling. So far no leaks.
Where can I get the clips? I plan on replacing them.
Thanks,
Robert
I'm new to this Ranger forum...mine is a 2000 Mazda Troy-Lee, 3.0 Cab Plus, which is essentially a Ranger...
What happens if I break one of the clips (I believe an R-Clip, as the manual states)?
I just broke one while changing the fuel filter. I put the clip back on, it stays in place and I taped over it with duct tape to prevent the clip from falling. So far no leaks.
Where can I get the clips? I plan on replacing them.
Thanks,
Robert
#11
You are absolutely right...
They do not...
They thought this filter was changed with the special tool that they sell. I have the tool, for my F-150. I did not need it for the Ranger.
I'll post here to let you know if any clips for any other year or model will fit. I'll keep looking.
Thanks again!!
They do not...
They thought this filter was changed with the special tool that they sell. I have the tool, for my F-150. I did not need it for the Ranger.
I'll post here to let you know if any clips for any other year or model will fit. I'll keep looking.
Thanks again!!
#12
#14
#15
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: Fuel line between fuel filter & fuel pump - TN
iplayloudly
OLD - Interior, Exterior, Electrical, & Misc.
7
05-02-2012 03:10 PM
2003stealthedge
General Ford Ranger Discussion
11
11-06-2005 06:03 PM