Fuel gauge stuck on E.
#1
Fuel gauge stuck on E.
I did a quick search but didn't have much luck.
I'm having an issue with our Ranger,it started a week or so ago.
After getting gas last week the fuel gauge went straight to E and will only move after the truck is shut off. Then it will slowly rise up to 1/4 tank regardless of how much fuel is in the tank.
As soon as the truck is keyed on it drops right back to E.
Just wondering if this is a common issue as my friends B2300 has the same problem?
Any advice on where to get started to fix this?
I'm having an issue with our Ranger,it started a week or so ago.
After getting gas last week the fuel gauge went straight to E and will only move after the truck is shut off. Then it will slowly rise up to 1/4 tank regardless of how much fuel is in the tank.
As soon as the truck is keyed on it drops right back to E.
Just wondering if this is a common issue as my friends B2300 has the same problem?
Any advice on where to get started to fix this?
#2
#4
To check the sending unit, Grab a buddy and a test light. Pull the connecting wire off the top of the sending unit, have your buddy turn the truck on. start testing wires until the gauge goes up to full. If you can find the wire where it makes the gauge go to full, you need a sending unit, if not, it could be the gauge or the wires.
#7
Thread
Thread Starter
Forum
Replies
Last Post
rangerboy89
General Technical & Electrical
5
04-28-2016 11:59 PM
Want to Buy: Fuel line between fuel filter & fuel pump - TN
iplayloudly
OLD - Interior, Exterior, Electrical, & Misc.
7
05-02-2012 03:10 PM
Enduro
SOHC - 2.3L & 2.5L Lima Engines
1
09-26-2011 12:15 PM
Kodfish
OLD - Interior, Exterior, Electrical, & Misc.
0
05-28-2011 11:09 AM