Urgent: brake issue
 

i have a 94 ranger, having brake issues. had to replace one of the lines going from the master cylinder to the proportioning valve. Im not too sure if this was a prior problem, i think it may have been. Onto the issue, i have front brakes bled both sides no issues. I then went to the rear, driver side has nothing coming out and the passanger side has just a drip coming out. anyone with some insight on where to go or what to replace would be greatly appreciated!! :hail: leaving friday for carlisle and need it fixed by thursday thanks for the help everyone

If memory serves correctly , if the proportioning valve is out of fluid , the line needs to be vacuum bled. You can't do it by the pedal method.
Someone on these forums had that problem years ago but I am unable to locate that thread.