No Brake Lights or Turn Signals
#1
No Brake Lights or Turn Signals
Spent the day flipping the rear hangers in my 2001 XL, more on that some other time. When taking the bed off i failed to disconnect the taillight relay from the frame and ended up tearing the connector apart. After putting everything back together i now only have running and reverse lights, no brake and turn signals. i checked the output into the bulbs and it is still getting power but the brake and turn signals aren't turning on. best i can figure it is an issue with a ground somewhere.
are there some grounds to the bumper or frame which i might have overlooked?
any advice is appreciated.
are there some grounds to the bumper or frame which i might have overlooked?
any advice is appreciated.
#3
turns out after disconnecting and reconnecting the lights one was able to get working but other one seems to be burnt out. they were working before and the filaments are intact so i must have damaged the light somehow. everything should work fine once i get a new bulb tomorrow, fingers crossed.
#4
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
tractorman
General Technical & Electrical
11
07-15-2010 07:56 AM
j99ranger4x4
General Technical & Electrical
2
01-10-2010 11:45 AM