General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Trouble starting 2.3L gas 1987 4x2 Ranger

  #1  
Old 01-22-2015
nifaron's Avatar
Member
Thread Starter
Join Date: Jan 2015
Location: Grinnell
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Trouble starting 2.3L gas 1987 4x2 Ranger

Hi folks!

I have a 1987 Ford Ranger with the 2.3L gas. It recently started running very rough on startup - very sluggish when shifting thru the first couple gears. I cleaned the throttle body and it ran better, but not perfectly. A few things I've read suggested the MAP sensor, so I replaced it, and for a day it ran very well. Went to start the next morning while fairly cold outside and nothing. A few sputters, but it wouldn't start. The next day when it was warmer it started and ran fine, so I let it idle for a couple hours to burn thru some of the older gas. The next day went to start it, nothing. I then replaced the fuel filter, no luck. Then tried a new IAP sensor for the heck of it, nothing. When cranking over it gives a few sputters, but won't start.

Any thoughts would be greatly appreciated!

Thanks!
Aaron
 
  #2  
Old 01-22-2015
nifaron's Avatar
Member
Thread Starter
Join Date: Jan 2015
Location: Grinnell
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
I realize I have posted this in the wrong forum! Very sorry, it should probably be in the 2.3L forum.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nifaron
SOHC - 2.3L & 2.5L Lima Engines
1
01-23-2015 10:24 AM
ggauld
SOHC - 2.3L & 2.5L Lima Engines
0
11-25-2013 10:49 AM
Pirateman
2.9L & 3.0L V6 Tech
0
12-10-2012 11:32 PM
Barq
General Technical & Electrical
0
10-16-2009 10:51 AM
edgeofthecliff
Suspension Tech
6
04-01-2005 02:15 PM


Thread Tools
Search this Thread
Quick Reply: Trouble starting 2.3L gas 1987 4x2 Ranger



All times are GMT -6. The time now is 02:24 AM.