Windows - Ranger-Forums - The Ultimate Ford Ranger Resource


General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
Windows

well today after school my windows roll down and up and now i get home and want to roll them down they they dont work. any ideas?
Reply With Quote
  #2  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
power windows btw
Reply With Quote
  #3  
Old 12-12-2007
M50B06's Avatar
Member
 
Join Date: May 2007
Location: Ravenna ohio
Posts: 315
Does driver window work from driver side-does pass. window work from driver side-does pass window work from pass side-check all buttons to see if you can narrow to one button or all three buttons
i would check fuse 1st to make sure its not bad
then take off the door panel and check to see if wire harness came loose from button
Reply With Quote
  #4  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
dosnt work from driver side or passanger side, also my dome light dosnt work anymore and 4x4 lights are flashing. and also the unlock button dosnt work on the drivers side door, it will lock but not unlock but the passanger side unlock/lock button works perfect.
Reply With Quote
  #5  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
alright it blew a fuse but every time i put a new one it keeps blowing the fuse.
Reply With Quote
  #6  
Old 12-12-2007
malydeen's Avatar
Member
iTrader: (12)
 
Join Date: Jul 2007
Location: Minneapolis, MN
Posts: 632
You have a short some where in your system. I would start with the door locks and look for the short there. You could also try unhooking the battery changing the fuse then hooking the battery back up.
Reply With Quote
  #7  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
unhooked the battery and all that still no luck, unhooked the unlock button on the drivers side and also the window buttons on driver side and still no luck. im clueless.
Reply With Quote
  #8  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
figured it out.
Reply With Quote
  #9  
Old 12-12-2007
5speedin2.3's Avatar
Member
 
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Quote:
Originally Posted by TrailRanger52
figured it out.
so what was wrong with it?
Reply With Quote
  #10  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
i have an explorer ohc and i have the wires tapd for the ohc domelight into the stock domlight like n3elz tutorial says and it worked good untill today it didnt like it i guess lol.
Reply With Quote
  #11  
Old 12-12-2007
5speedin2.3's Avatar
Member
 
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Quote:
Originally Posted by TrailRanger52
i have an explorer ohc and i have the wires tapd for the ohc domelight into the stock domlight like n3elz tutorial says and it worked good untill today it didnt like it i guess lol.
ah i see..
ive installed a few OHC's and ive never had any problems.

electrical tape, scotch loks and butt connectors are your friend haha.
that is, until one of the scotch loks fail and everything ****s up.
Reply With Quote
  #12  
Old 12-12-2007
TrailRanger52's Avatar
Member
Thread Starter
 
Join Date: Sep 2006
Location: Evansville, Indiana
Posts: 217
yea i always use butt connectors. but on those wires i just had them electircal taped together, that may have been my problem.
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Manual windows and locks to Power Windows Quinnin Interior Semi-Tech 31 10-30-2016 10:00 AM
How To: Auto Up/Down Windows Strider0O0 Interior, Exterior, & Electrical 23 08-10-2014 07:42 PM
No Power Windows Igobytwitch General Technical & Electrical 8 11-12-2008 07:41 PM
changing the windows to power windows smokinedge General Technical & Electrical 1 05-28-2008 07:02 PM
Cleaning Tinted Windows Diabolic Auto Detailing 101 16 04-29-2005 11:49 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 10:50 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.