Need Help with Rear View Mirror
#1
03-08-2008
Join Date: Mar 2008
Location: Waterford, CT
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#2
03-08-2008
Assuming you got it out of an Explorer....
Pin 6 RD/YE 12v in Run 7.5A fuse
Pin 5 LG/YE 12v Hot at all times 7.5A fuse
Pin 4 BK Ground
Pin 3 BK/PK 12v routed through the DTR reverse contacts or backup lights switch (manual trans) 15A fuse
Pin 2 WH/VT to Autolamps Sensor output 2, which is a switched ground shared with the Parking and Head Lamp relay coils.
I don't know a thing about that mirror, but it appears it needs to know the lights are on by giving it a ground on WH/VT.
PM me an e-mail address and I will send you the diagrams.
Pin 6 RD/YE 12v in Run 7.5A fuse
Pin 5 LG/YE 12v Hot at all times 7.5A fuse
Pin 4 BK Ground
Pin 3 BK/PK 12v routed through the DTR reverse contacts or backup lights switch (manual trans) 15A fuse
Pin 2 WH/VT to Autolamps Sensor output 2, which is a switched ground shared with the Parking and Head Lamp relay coils.
I don't know a thing about that mirror, but it appears it needs to know the lights are on by giving it a ground on WH/VT.
PM me an e-mail address and I will send you the diagrams.
Last edited by Earl43P; 03-08-2008 at 04:53 PM.
#3
03-11-2008
Join Date: Mar 2008
Location: Waterford, CT
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Jp7
OLD - Interior, Exterior, Electrical, & Misc.
18
08-01-2010 05:08 PM
RangerNDog
Snapshots
9
07-23-2009 11:06 PM
edgerider2002
OLD - Interior, Exterior, Electrical, & Misc.
13
06-27-2009 10:08 PM
