Or pop it out but in teh B series they came carbon fiber, looks sick

 

05's dont have the headlight switch/fog light switch it is the newer rangers like 06 and up

 

Does anyone have a clue to what color wire goes up front for the parking lights so I can tap into that?

 

My 04 has it

 

You turn your foglights on by pulling out on the headlight switch?

 

Brown

 

Ok, thanks man. I hope by the end of the night I got this thing working.

 

Its 07+

 

I know he cant have it on his 04 my 05 doesnt even have that why would they switch it then switch it again.

O wait it is ford so it's possible

 

They didn't, my 04 is the bezel pushbutton.

 

2006 Ford Ranger foglight switch radio bezel


2007 Ford Ranger No foglight switch

2007 Ford Ranger headlight/foglight switch

 

Yeah, thats what I said lol

 

No I thought you where talking about the push button

 

Oh ya! All done and it works. Just need to get one new bulb tomorrow and I am good.

 

Nice job! Did you end up wiring it to the bezel switch or just a toggle?

 

I ended up putting in a toggle switch that has a little led in it for now on my current bezel but it looks good. I am still gonna look at the junkyard for what I want to make it look more stock. All in all, it was real easy just time consuming.

Here is the switch I put in. The other ones they had looked like crap and I wanted one that would light up when on.
http://www.radioshack.com/product/in...ductId=3097457

 

Ah nice, I have 5 of these waiting to be installed somewhere



Finding the bezel with the switch in it shouldn't be hard. If its missing the switch I have an extra here with a pigtail that I'll send you for like 5 bucks.

 

Ok I am trying to wire up my new factory fog light switch. The problem I am running into now is that when you turn the factory switch on, it sends a negative signal out. How can I wire the relay to send a positive current to the fog light with a negative signal?

 

Looks like this is what I am going to have to do.


Wire 3 becomes negative when you push the button in.

Wire 6 is then ran to the positive output side of the relay. Looks like I get to run another wire.

 

There's a better diagram on here somewhere... I've been looking for it for about 2 weeks now.

 

Ok, I finally got the switch to work. The problem now is that the power is always hot so if I have the truck off the fogs can be on by just pushing the switch in. I am gonna make the 12 volt power on the relay get power from the parking lights when i turn them on. Should fix the problem. Gonna do it tomorrow though. It is 12 here and I have work at 8. I know have to run two more wires to get everything working right.