How To: 96-03 Driver side airbag removal
#1
How To: 96-03 Driver side airbag removal
In this write up, you will learn how to change out your cruise toggles. This work was performed on a 2001 XLT.
**IF YOU ARE NOT COMFORTABLE WITH REMOVING YOUR AIRBAG YOURSELF, DO NOT ATTEMPT THIS! RANGER FORUM IS NOT RESPONSIBLE FOR ANY INCIDENTS WITH THIS PROCEDURE, THIS IS AN "AT YOUR OWN RISK" HOW TO.**
Tools needed:
Small flathead screw driver
8mm socket & Ratchet w/ extension
Step 1.
Disconnect your negative battery terminal!! THIS IS A MUST!
Step 2.
Using your flat head screw driver , pop off the two circular caps located on the sides of the steering wheel.
Step 3.
Locate and remove the two 8mm bolts that hold your airbag to the wheel itself.
Step 4.
Gently pull the airbag straight out and locate the wire harness.
Disconnect the harness.
Reinstall in reverse order.
Congratulations! You have successfully changed out your airbag!
**IF YOU ARE NOT COMFORTABLE WITH REMOVING YOUR AIRBAG YOURSELF, DO NOT ATTEMPT THIS! RANGER FORUM IS NOT RESPONSIBLE FOR ANY INCIDENTS WITH THIS PROCEDURE, THIS IS AN "AT YOUR OWN RISK" HOW TO.**
Tools needed:
Small flathead screw driver
8mm socket & Ratchet w/ extension
Step 1.
Disconnect your negative battery terminal!! THIS IS A MUST!
Step 2.
Using your flat head screw driver , pop off the two circular caps located on the sides of the steering wheel.
Step 3.
Locate and remove the two 8mm bolts that hold your airbag to the wheel itself.
Step 4.
Gently pull the airbag straight out and locate the wire harness.
Disconnect the harness.
Reinstall in reverse order.
Congratulations! You have successfully changed out your airbag!
#2
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: OEM 99 driver airbag. Should fit 95-2003
Jwad00
OLD - Interior, Exterior, Electrical, & Misc.
0
01-04-2011 05:56 PM
Want to Buy: 2004-2006 Driver's side airbag FL
elementsenjoi
OLD - Interior, Exterior, Electrical, & Misc.
1
03-09-2010 09:14 PM
Ace
OLD - Interior, Exterior, Electrical, & Misc.
15
06-01-2009 10:02 PM