How to: 01+ headlight and corner removal
 

In this, you will learn how to remove your headlights and corner (marker) lights on your truck


This work was performed on a 2001 XLT

Tools required:
Ratchet & 6mm socket

Step 1.
Open your hood. At the hood latch you will see plastic cowling which covers the gap from the core support to your header panel.
**04+ models do not have this cowling**
The cowling is in 3 seperate pieces, Locate the screws which mount the cowling to the header panel. You do not need to remove the center piece
!
Passenger side: Two 6mm screws and a plastic push screw
https://www.ranger-forums.com/attach...ine=1347729980

Drivers side: Two 6mm screws and a plastic push screw
https://www.ranger-forums.com/attach...ine=1347729980


Once unscrewed, remove the cowling
https://www.ranger-forums.com/attach...ine=1347729980
https://www.ranger-forums.com/attach...ine=1347729980

Step 2.
Locate the headlight retaining brackets. These are behind the header panel and slide up and down to latch the headlight in place. These latches have an upside down "L" shape...pointed out by the dots.
https://www.ranger-forums.com/attach...ine=1347729980

Lift the headlight brackets in an upward motion to unlock your headlight anchor pins
Lifted brackets:
https://www.ranger-forums.com/attach...ine=1347729980

Step 3.

Pull your headlights straight out. You can disconnect the bulb harness by unplugging the male/female connectors or by simply twisting the bulb out.
If you choose to remove the bulb plugs use the following steps:
The headlight bulb needs to be moved in a back and forth motion to remove, marker light will twist out.
https://www.ranger-forums.com/attach...ine=1347729980
https://www.ranger-forums.com/attach...ine=1347729980
https://www.ranger-forums.com/attach...ine=1347729980

Repeat on the other side

Congratulations, your headlights have been removed!
Onto the next:

Step 4:
Removing your corner (marker) lights

Using your 6mm socket and ratchet, remove the 2 retaining screws(pointed out by the dots) holding the marker light assembly to the header panel
https://www.ranger-forums.com/attach...ine=1347729980
https://www.ranger-forums.com/attach...ine=1347729980

Next pull the corner assembly straight out. At the top of the assembly is an alignment pin which clips into a retaining nut. Just [ull the assembly straight out and it will pop out.
https://www.ranger-forums.com/attach...ine=1347729980

Step 5.
Unplug the marker bulb by twisting it out
https://www.ranger-forums.com/attach...ine=1347729980

Repeat these step on the other side

Congratulations! You have successfully removed your headlights and and corners!