How-To: Install 07 Emblems
#1
How-To: Install 07 Emblems
How-To author: Brando5105
Original thread: https://www.ranger-forums.com/f59/07...ms-swap-50956/
Let the modding Begin!!
_________________________
I know that this is not the most challenging how to ever but what the heck. I did the emblems on the fenders.
Tools Needed.....
Blow Dryer with high setting (or just leave your truck out on a sunny day)
Putty knife
Degreaser (or other cleaner)
Clean Cloth
First use the blow dryer on the emblem for 5 or so minutes till the emblem tape softens up. Take the putty knife and carefully loosen the emblem off. It might look like this.
Then take the clean cloth and the degreaser and rub off the left behind mess. It will look like this when complete..
Next make sure area is cleaned. Take the double back tape off the new style emblems and insert the pegs into the empty holes. Hold for 30 seconds. And thats it. Do the same on the other side and your truck now has the updated look.
Original thread: https://www.ranger-forums.com/f59/07...ms-swap-50956/
Let the modding Begin!!
_________________________
I know that this is not the most challenging how to ever but what the heck. I did the emblems on the fenders.
Tools Needed.....
Blow Dryer with high setting (or just leave your truck out on a sunny day)
Putty knife
Degreaser (or other cleaner)
Clean Cloth
First use the blow dryer on the emblem for 5 or so minutes till the emblem tape softens up. Take the putty knife and carefully loosen the emblem off. It might look like this.
Then take the clean cloth and the degreaser and rub off the left behind mess. It will look like this when complete..
Next make sure area is cleaned. Take the double back tape off the new style emblems and insert the pegs into the empty holes. Hold for 30 seconds. And thats it. Do the same on the other side and your truck now has the updated look.
Last edited by 98liftedranger; 11-27-2011 at 09:29 PM.
Thread
Thread Starter
Forum
Replies
Last Post