How-To: Nightshade your tail lights
#1
How-To: Nightshade your tail lights
How-To author: jeweler54
Original thread: https://www.ranger-forums.com/f59/ho...-lights-83358/
Let the modding Begin!!
_________________________
Items Needed:
Optional: Beer... I normally drink Coors Light, but this will do:
Step One: Remove your boring old tail lights....
Step Two: Wet Sand Tail Lights with 2500 Grit Sand paper
Sorry no pic....
Step Three: Clean Tail Lights with Denatured Alcohol
Step Four: Mask off any section that you don't want to tint
Step Five: Lay down One light coat of Nightshade (enough to barely see a color difference)
Step Six: Add more coats for desired shade
Step Seven: Wait at least 1 hour to dry Then after tint dries, shoot a couple coats of clear (optional)
Step Eight: The can says wait 24 hours to cure, but after just one hour of drying with a fan on them, they where ready to re-install------ Finished product: (mine are really dark!)
Original thread: https://www.ranger-forums.com/f59/ho...-lights-83358/
Let the modding Begin!!
_________________________
Items Needed:
Optional: Beer... I normally drink Coors Light, but this will do:
Step One: Remove your boring old tail lights....
Step Two: Wet Sand Tail Lights with 2500 Grit Sand paper
Sorry no pic....
Step Three: Clean Tail Lights with Denatured Alcohol
Step Four: Mask off any section that you don't want to tint
Step Five: Lay down One light coat of Nightshade (enough to barely see a color difference)
Step Six: Add more coats for desired shade
Step Seven: Wait at least 1 hour to dry Then after tint dries, shoot a couple coats of clear (optional)
Step Eight: The can says wait 24 hours to cure, but after just one hour of drying with a fan on them, they where ready to re-install------ Finished product: (mine are really dark!)
Last edited by 98liftedranger; 11-27-2011 at 09:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Taylor
OLD - Interior, Exterior, Electrical, & Misc.
3
07-01-2012 07:55 PM
Want to Trade: Euro Tail Lights for 06+ Tail Lights
Masteratarms93
OLD - Interior, Exterior, Electrical, & Misc.
0
07-19-2010 11:29 PM