Mazda gauge cluster w/ tach (oregon)
 

Up for grabs is a 2003 Mazda B-series gauge cluster. Will work in all 95-03 Rangers, B-series, 95-01 Explorer, and 95-03 Sport and Sport Trac. Would be perfect for guys that don't have a tach in their truck. Everything functions just as it should. I had it in my truck for a few weeks about a month ago and don't remember if all illumination bulbs worked but you should replace them anyway for good measure. The clear plastic cover is in good shape...has very minimal scratches as though someone took a rag and wiped it without cleaner or something. This is a pretty normal thing though. Odometer currently reads 51,967. Does not include a shift indicator for autos or a block off plate for manuals. You'll need to use your existing one. I don't have any spares.

Asking SOLD!!.

Paypal preferred.

For a minimal fee, I will make the odometer reading match your existing odometer reading.



http://i632.photobucket.com/albums/u...e/P5190380.jpg

http://i632.photobucket.com/albums/u...e/P7090008.jpg

Is this out of a 4cyl or a 6cyl?

Doesn't matter....they're the same gauges. Plus, I don't remember if it was 4 or 6 cyl. lol.

Shane, ill probably be installing this for david. is there any re-pinning that has to be done similar to the 5.0 swap re-pinning for the tach to read accurately?

The cluster is the same as any RBV tach cluster guts and ribbinwise...I would assume what needs done on say, an Expo or 03 ranger cluster, would be the same required for this cluster.

which would be what? i did nothing to my 03 ranger cluster when i installed it

IDK! lol. Nothing shoud be needed done at all period...just like any other cluster swap. At least to my knowledge. There may be, and I've read, there are certain steps that need to be taken to install on a 95-97. What those are, I havn't a clue. Never had to need to know that info.

Whatever's required to do for a Expo white face, would be the same required on this one I'm offering. I don't know what else to say.

okie dokie. ill check around and look at wiring diagrams. ill have to find someone with a 95-97 that has done a swap

Is the cluster still available? And if so, how much to change the odometer? Let me know thx.

you can change the odometer yourself. There are 3 small screws in the back of the odo, unscrew them and the whole piece comes out, just switch it with the one on your truck now....very simple

Cluster is still available. Sent ya a PM...

There's ALOT more to it than just removing the screws..... like calibrating the speedo so your needle is set back to dead-on factory accuracy instead of being 5 or 10 off.

I've done probably 6 odometer rolls so I've got it down pretty good.

BUMP! Price drop....

Cluster is SOLD!!